About This Item: Bushing Bearing Extractor Installer Kit Hydraulic Sleeve Kit w/ Pulling Spindle
About This Item:
- FUNCTION:The hydraulic bush extractor and installer kit is designed for removing and installing bushings and bearings
- SAVE TIME & EFFORT:The hydraulic bush extractor and installer kit saves more time and effort for removal and installation work compared to non-hydraulic kits
- SIMPLIFY MAINTENANCE PROCESS:The bushing bearing installation removal tool can be used directly on the vehicle for maintenance, simplifying the repair process
- Customized Fit: A form fitting design ensures that each tool has its dedicated space, preventing the tools from moving around freely and colliding with each other. This also makes it extremely easy for mechanic to identify and access the tools they need at a glance.
- Compact Exterior: Due to the effective utilization of internal space, the toolbox has a more compact appearance. This makes it easier to store in limited spaces such as small workshops or car trunks.
- Portable and Easy Carry:TheSturdy Caseequipped with wheels,becomes very convenient to move. No need to lift with effort, easily move to the desired position with a gentle push, saving energy
- NOTE:Please lubricate the power screw regularly to keep the puller in good working
- 22 Black SLEEVES:Sleeve size: 18 - 60mm (ID) and 26 - 68mm (OD) with 2mm increments
- 22 GoldSLEEVES:Sleeve size:16 - 58mm (ID) and 26 - 68mm (OD) with 2mm increments
- 4 Pulling spindle:M10 x P1.5, M12 x P1.75, M14 x P2.0 and M16 x P2.0
Package Includes:
1 x Hydraulic Bush Extractor Installer Asked Questions:
What hydraulic pump would i need for it to work?
This product can only be used with an Air Hydraulic Foot Operated Pump
******How to install bushing?
- Thread the line through the new bushing.
- Tighten the nut end for pressing, and place the barrel on the opposite side.
- Position the silver component toward the rear side.
- As the assembly stretches, the tip of the black barrel presses into a rear cup mounted on the bushing housing. This rear cup features a larger diameter and circumference than the front cup.
- The front cup fits perfectly against the outer edge of the bushing, pulling the bushing fully into place.
Item SpecificsCondition NewBrand TRUCFUSIONMPN Does Not ApplyType Hydraulic Bush Extractor Installer KitItem Type Bushing Bearing Installation and Removal Tool KitModel Pin and Bushing Starter KitQuantity 51 PiecesItem Weight 68.2 poundsPackage Dimensions 38 x 16.5 x 7.9 inchesFeatures Easy to Operate, DurableItem model number Bushing Bearing Installation and Removal Tool Set UniversalExterior PaintedColor BlackFUNCTION for removing and installing bushings and bearingsBlack Sleeve Size 18 - 60mm (ID) and 26 - 68mm (OD) with 2mm incrementsGold Sleeve Size 16 - 58mm (ID) and 26 - 68mm (OD) with 2mm incrementsPulling Spindle M10 x P1.5, M12 x P1.75, M14 x P2.0 and M16 x P2.0Manufacturer Warranty LifetimeAbout after-sales Money back or replacement(Buyer's choice)
Payment
We accept Payoneer/Paypal/Google Pay/Visa/Master Card/Amex/Discover for Payment.
Payment must be received within 7 business days of sale closing.
We ship to 's address only. Please make sure your address in is matched with your shipping address before you pay.
TOTAL AMOUNT DUE includes the final sale price plus S&H (Shipping and Handling).
S&H will be determined based upon the ship to address
Shipping
Order will be handled within1working days( Excluding Weekends and Public Holidays) after your payment clear.
We ship toOrder Detailconfirmed address ONLY. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.
Please obtain the RMA number & returned address for any return items.
Return items MUST have all ORIGINAL packaging and accessories.
We will replace items which are malfunctioning, for60 days from the date you received.Items which have physical abuse are not covered by the warranty.
Returns
How to send a return request:
Attention: Please contact us via message like the way shown above before starting a return request, so we can deal with your issue quickly and efficiently.
1.Return this item.
2. Select a reason: please choose"It's the wrong size or doesn't fit"
3.60 days Warranty from the date of purchase covering manufacturing defects, but doesn't cover items that have seen abused, burned and damaged in any form.Please contact us if you have NOT received item beyond 5 working days, we will check it with post office and resend any missing item.
4. If you return an item purchased from us, it must be back in Factory Condition. This includes packaging, inserts, manuals etc. Please allow up to 5 Working Days for us to process your returned item.Thanks!
Contact Us
Please use the link "Ask the Seller Question" or send " message" in you "My " to contact us if you have problems, special requests or suggestions, we are very glad to help you anytime. we will reply you within 24 hour.
Bushing Bearing Extractor Installer Kit Hydraulic Sleeve Kit w/ Pulling Spindle
About This Item:
- FUNCTION:The hydraulic bush extractor and installer kit is designed for removing and installing bushings and bearings
- SAVE TIME & EFFORT:The hydraulic bush extractor and installer kit saves more time and effort for removal and installation work compared to non-hydraulic kits
- SIMPLIFY MAINTENANCE PROCESS:The bushing bearing installation removal tool can be used directly on the vehicle for maintenance, simplifying the repair process
- Customized Fit: A form fitting design ensures that each tool has its dedicated space, preventing the tools from moving around freely and colliding with each other. This also makes it extremely easy for mechanic to identify and access the tools they need at a glance.
- Compact Exterior: Due to the effective utilization of internal space, the toolbox has a more compact appearance. This makes it easier to store in limited spaces such as small workshops or car trunks.
- Portable and Easy Carry:TheSturdy Caseequipped with wheels,becomes very convenient to move. No need to lift with effort, easily move to the desired position with a gentle push, saving energy
- NOTE:Please lubricate the power screw regularly to keep the puller in good working
- 22 Black SLEEVES:Sleeve size: 18 - 60mm (ID) and 26 - 68mm (OD) with 2mm increments
- 22 GoldSLEEVES:Sleeve size:16 - 58mm (ID) and 26 - 68mm (OD) with 2mm increments
- 4 Pulling spindle:M10 x P1.5, M12 x P1.75, M14 x P2.0 and M16 x P2.0
Package Includes:
1 x Hydraulic Bush Extractor Installer Asked Questions:
What hydraulic pump would i need for it to work?
This product can only be used with an Air Hydraulic Foot Operated Pump
******How to install bushing?
- Thread the line through the new bushing.
- Tighten the nut end for pressing, and place the barrel on the opposite side.
- Position the silver component toward the rear side.
- As the assembly stretches, the tip of the black barrel presses into a rear cup mounted on the bushing housing. This rear cup features a larger diameter and circumference than the front cup.
- The front cup fits perfectly against the outer edge of the bushing, pulling the bushing fully into place.
PaymentShippingReturnsContact Us
We accept Payoneer/Paypal/Google Pay/Visa/Master Card/Amex/Discover for Payment.
Payment must be received within 7 business days of sale closing.
We ship to 's address only. Please make sure your address in is matched with your shipping address before you pay.
TOTAL AMOUNT DUE includes the final sale price plus S&H (Shipping and Handling).
S&H will be determined based upon the ship to address
Order will be handled within1working days( Excluding Weekends and Public Holidays) after your payment clear.
We ship toOrder Detailconfirmed address ONLY. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.
Please obtain the RMA number & returned address for any return items.
Return items MUST have all ORIGINAL packaging and accessories.
We will replace items which are malfunctioning, for60 days from the date you received.Items which have physical abuse are not covered by the warranty.
How to send a return request:
Attention: Please contact us via message like the way shown above before starting a return request, so we can deal with your issue quickly and efficiently.
1.Return this item.
2. Select a reason: please choose"It's the wrong size or doesn't fit"
3.60 days Warranty from the date of purchase covering manufacturing defects, but doesn't cover items that have seen abused, burned and damaged in any form.Please contact us if you have NOT received item beyond 5 working days, we will check it with post office and resend any missing item.
4. If you return an item purchased from us, it must be back in Factory Condition. This includes packaging, inserts, manuals etc. Please allow up to 5 Working Days for us to process your returned item.Thanks!
Please use the link "Ask the Seller Question" or send " message" in you "My " to contact us if you have problems, special requests or suggestions, we are very glad to help you anytime. we will reply you within 24 hour.
All rights reserved.
On Sep 17, 2026 at 08:50:01 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.