|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
|
USERBARS.org | Free Forum Userbars
| On eBay now |
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C
$227.90
About this item - !!Ramps will not cover the entire opening!! Aluminum Metal treadplate is not included!!
- Each ramp will be 22 inches wide
- Recommended Length on all ramps is 4\' to 6\'
- 1500 lbs weight limit per ramp
- You will need 6 boards of 2x8
Product Description !!PLEASE READ BELOW!! All our ramp kits are DIY and you will need to buy 6 boards of 2x8 lumber. We recommend your ramps to be 4\' to 6\'. Any longer will require some type of support to prevent flexing or bowing. The 2-Section Kit with 72\" J-Channels include 2 (36\") J-Channel that screws into your shed, 4 end caps that hold the ramps together, 2 brackets that screw on the ramps to mount on the J-Channel, and screws for installation. Please see video for instrutions or contact us
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
|
|
|
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C$229.81
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C$247.71
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C$232.48
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C$225.99
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C$220.49
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C$227.90
DIY 44" Ramp Kit - Build Your Own 2-Section Ramp (22" Wide) with 60" J-Channel$284.99
Build Your Own Ramp for Shed or Building - DIY Aluminum Ramp Kit (200501 72" J-C$226.99
