Brownells MAGNA-TIP Thin-Bit Set - 18 narrow bits

MAGNA-TIP THIN-BIT SET

Eighteen incredibly thin bits to fit the extra-narrow screw slots often encountered in the gun shop. Take great care when using these bits. The blade MUST fill the slot from side-to-side and edge-to-edge or it will most certainly break on a firmly seated screw. Freeze spray, heat, penetrating oil, a few taps, regrinding the bit for an even better fit - all these tricks can help give success.

Bits Inluded in Kit

• #120-1 Width 0.120 Thickness 0.020
• #120-2 Width 0.120 Thickness 0.025
• #150-1 Width 0.150 Thickness 0.020
• #150-2 Width 0.150 Thickness 0.025
• #180-1 Width 0.180 Thickness 0.020
• #180-2 Width 0.180 Thickness 0.025
• #210-1 Width 0.210 Thickness 0.020
• #210-2 Width 0.210 Thickness 0.025
• #240-1 Width 0.240 Thickness 0.020
• #240-2 Width 0.240 Thickness 0.025
• #270-1 Width 0.270 Thickness 0.020
• #270-2 Width 0.270 Thickness 0.025
• #300-1 Width 0.300 Thickness 0.020
• #300-2 Width 0.300 Thickness 0.025
• #340-1 Width 0.340 Thickness 0.020
• #340-2 Width 0.340 Thickness 0.025
• #360-1 Width 0.360 Thickness 0.020
• #360-2 Width 0.360 Thickness 0.025

SPECIFICATIONS:

• 18 Hardened Steel MAGNA-TIP Bits
• Hollow Ground Straight Edged Thin Bits
• Solid Oak Bench Block
• Clear Plastic Case