Details
OE Number91664083
Complete Disc Brake Solution
This complete, yet economical disc brake kit for Ford 9 inch and 8 Inch axles is simple to install and provides big stopping power, at a price nearly the same as replacing original drum brakes. Today’s average family sedan can stop from 60 MPH in 120 feet, at nearly 1G of deceleration. You need the same stopping power.Superior to Drum BrakesAftermarket disc brakes are superior to original drums in many ways: more braking force, less brake fade, and easier service. Stopping power starts with our newly manufactured GM Metric D154 style single piston calipers with a 2.5\" bore size. The integrated emergency brake lever makes parking brake setup a breeze for any vehicle. These calipers were originally found on 1979-85 GM E-Bodies (Eldorado/Riviera/Toronado) and 1980-85 GM K-Bodies (Cadillac Seville).Large 11\" diameter, 1\" thick vented rotors provide more stopping leverage than common 9\" or 10\" drum brakes. Brake pads are easier to change than drum shoes, and our brake kit includes a street-friendly organic compound for long rotor/pad life. Replacement pads are common sized, available from your local auto parts store. Looking for more aggressive stopping power? We carry race-grade D154 disc brake pads that drop in just as easily. Rubber flex lines with matching banjo bolts, e-brake cables and frame tabs/clips are included to finish out the installation. Fits For Ford 9 Inch and 8 Inch HousingsThis rear disc brake kit fits Ford 8\" axles, as well as passenger car Ford 9 inch axle housings with “big bearing” ends (3.150\" O.D. bearing, found on passenger cars from 1974-79). Included bracketry will adapt this kit to both “new style”and “old style” Ford 9 inch housing flanges with the 3/8\" bearing retainer bolt holes. Bracket spacers are also included, allowing this kit to work with axle flange offsets of 2-3/8\" or 2-1/2\" common on Ford 9 inch passenger car rear ends. Axle flange offset is measured from the axle housing flange face (with bearing retainer removed) to the axle shaft flange face (side where the brake rotor/drum rides, including the thickness of the axle flange). Hardware IncludedThe floating calipers include new Grade 5 slider bolts, with all remaining hardware of Grade 8 quality. Cast iron rotors feature a dual bolt pattern in 5x4.5\" (Ford/Mopar/AMC) or 5x4.75\" (Chevy/GM) to match your desired wheel hub pattern. Plus, this assembly will clear most 15\" diameter wheels designed with disc brakes in mind.
- Disc brake stopping power at nearly the same cost as rebuilding/replacing drum brakes
- 11\" diameter, 1\" thick vented cast iron rotors dissipate heat faster than drum brakes
- Serviceable design ensures good drivability and piece-of-mind when on the road
- Street-friendly GM D154 style pads, replacements available nearly everywhere
- GM “Metric\" style single piston calipers with 7/16-20 banjo-style inlets
- Integrated parking brake for a feature-complete brake system
- Brackets position the caliper in a rear-mid orientation, ideal for pull-type E-brake cables
- Fits Ford “big bearing\" 9 inch housings from passenger cars and 8 inch rear ends
- Use with Ford 9 inch rear ends with 2-3/8\" or 2-1/2\" axle flange-to-housing offsets
- Dual wheel bolt patterns covering all GM/Ford/Mopar
- GM Stud Pattern: 5x4.75\" w/ 7/16\" Studs
- Mopar/Ford Stud Pattern: 5x4.5\" w/ 7/16 Studs (Will Need to be drilled out for use with 1/2\" studs)
- Use with 15\" or larger disc brake-style wheels
- Includes
- Heavy steel mounting brackets
- E-brake cables rubber brake hoses with matching banjo bolts
- Frame tabs and clips for hoses
- Grade 8 hardware and nylock nuts (everything you need)
Installation Tips
- For passenger car axles only, 15\" and larger wheels only
- Fits 9 inch housing axle offsets of 2-3/8\" to 2-1/2\" (measured from outside of housing flange to outside of axle flange, not measured out to axle register but only surface where the rotor sits against). Requires “big bearing\" housing ends (for a 3.150\" O.D. bearing) with 3/8\" bearing retainer bolt holes.
- Brake rotor has a 2.78\" center hole and works with axle shaft flanges no larger than 6-1/8\" diameter. If your axle shaft flange exceeds that diameter, you will need machine the flange to decrease the diameter.
- Brackets position the calipers in a rear-mid orientation (3 o’clock on the driver side rear wheel), making this ideal for pull-type emergency brake cable systems (most OEM systems work in this way).
- This kit is an aftermarket solution. It is not intended to be a direct installation or OEM replacement. Due to changes in production in certain years, your application may require modifications beyond these instructions for this kit to install properly.
Note: If your axle shaft flange or axle shaft register exceeds the diameter that clears the rotor dimensions, you will need to machine the axle flange and/or the rotor to clear the diameter required.
Specs
Sold in Quantity: Kit
Rotor Diameter: 11 Inch
Minimum Recommended Wheel Diameter: 15 Inch
Caliper Finish: Natural
Rotor Shape: Round
Rotor Style: Plain Face
Color: Natural
Hardware Included: Yes
Parking Brake Provision: Yes
Rotor Thickness: 1
Position: Rear
Front Caliper Finish: Natural
Rear Rotor Included: Yes
Front Spindles Included: No
Master Cylinder Included: No
Brake Booster Included: No
Brake Hose Material: Rubber
Brake Hoses Included: Yes
Front Caliper Included: No
Front Rotor Included: No
Rear Caliper Included: Yes
Application Type: Disc/Disc
Rotor Type: Vented
Bolt Pattern: 5 on 4.5\" | 4.75\"
Caliper Pistons: One
Front Caliper Piston Quantity: 1
Front Rotor Diameter: 11 Inch
Ford Bearing End Style: Big Ford (Old/New) & Small Ford
Axle Flange Offset: 2.36\" - 2.50\"
Professional installation is recommended.
Please check the part number and illustrations carefully to ensure that it fits your model. If you are not sure, please contact us and we will respond as soon as possible.
★Professional Seller★ ☑Quality Assurance☑ ✈︎Fast Shipping✈︎ ☺Efficient Service☺
- Shipping Policy
- Payment Method
- Returns Policy
Shipping Policy
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your or Paypal address. Please make sure your and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
Payment Method
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of sale closing.
Returns Policy
-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with messages,we will offer you refund or replacement.
Product ViewDetails
Fitment InformationCompatible with: Ford 8” axles; Ford 9” passenger car axle housings with “big bearing” ends (3.150” O.D. bearing), commonly found on 1974-1979 Ford passenger cars.Fits Ford 9” housing flanges: Both “new style” and “old style” flanges featuring 3/8” bearing retainer bolt holes.Axle Flange Offset: Compatible with 2-3/8” (2.36”) or 2-1/2” (2.50”) offsets. Measure from the axle housing flange face (with the bearing retainer removed) to the axle shaft flange face, including the thickness of the axle flange.Stud Patterns:
- GM: 5x4.75\" with 7/16\" studs
- Mopar/Ford: 5x4.5\" with 7/16\" studs (drilling required for 1/2\" studs)
Minimum Recommended Wheel Diameter: 15 InchNote: Please verify your vehicle’s specific specifications to confirm compatibility before purchase. Key Product Highlights
- Disc brake stopping performance at a price comparable to rebuilding or replacing traditional drum brakes
- 11” Cross Drilled and Slotted cast iron rotors (1” thick) dissipate heat faster than drum brakes and plain-face rotors, reduce brake fade, minimize brake dust, and extend component life
- Serviceable design for easy maintenance, giving you peace of mind on the road
- Street-friendly organic brake pads with wide availability for hassle-free replacements
- Single-piston calipers with 7/16-20 banjo-style inlets for reliable fluid flow and consistent braking
- Integrated parking brake for a fully functional, road-ready brake system
- Caliper positioned in a rear-mid orientation, ideal for pull-type emergency brake cables
- Dual bolt patterns (5x4.5\" & 5x4.75\") to fit a wide range of GM, Ford, and Mopar wheel hub patterns
- Compatible with 15” or larger disc brake-compatible wheels
- This kit is an aftermarket solution. It is not intended to be a direct installation or OEM replacement. Due to changes in production in certain years, your application may require modifications beyond these instructions for this kit to install properly.
Kit Includes
- Heavy-duty steel mounting brackets (includes spacers for accommodating different offsets)
- Single-piston rear calipers (left and right, designed for optimal fit with Ford 8”/9” axles)
- 11” diameter, 1” thick Cross Drilled and Slotted cast iron rotors (featuring dual bolt patterns for broad compatibility, with enhanced heat dissipation and debris clearance)
- Street-friendly organic brake pads (optimized for daily driving and long life)
- Emergency brake cables (pre-cut for proper fit with compatible Ford models)
- Stainless steel brake hoses with matching banjo bolts (for secure, leak-free connections, superior corrosion resistance, and longer service life compared to rubber hoses)
- Frame tabs and clips for secure brake hose mounting
- Grade 8 hardware and nylock nuts (complete set for full installation)
- Grade 5 slider bolts for floating calipers (ensuring smooth caliper movement)
- Includes
- Heavy steel mounting brackets
- E-brake cables rubber brake hoses with matching banjo bolts
- Frame tabs and clips for hoses
- Grade 8 hardware and nylock nuts (everything you need)
Detailed SpecificationsBasic Information
- Sold in Quantity: Complete Kit
- Position: Rear Axle
- Application Type: Disc/Disc Brake Configuration
- Color: Natural (uncoated, raw metal finish)
Rotor Specifications
- Rotor Diameter: 11 Inch
- Rotor Thickness: 1 Inch
- Rotor Type: Vented (for improved heat dissipation)
- Rotor Shape: Round
- Rotor Style: Cross Drilled and Slotted (enhances heat dissipation, reduces brake dust, and improves debris removal)
- Rotor Material: Cast Iron (durable and heat-resistant)
- Rear Rotor Included: Yes (2 rotors, one for each side)
- Front Rotor Included: No
Caliper Specifications
- Caliper Pistons: One (single piston design for reliable performance)
- Rear Caliper Included: Yes (left and right calipers)
- Front Caliper Included: No
- Caliper Finish: Natural (uncoated metal)
- Compatible Ford Bearing End Style: Big Ford (Old/New Styles) & Small Ford
Brake System Details
- Parking Brake Provision: Yes (integrated into caliper design)
- Brake Hoses Included: Yes (2 stainless steel brake hoses, offering better durability and corrosion resistance than rubber alternatives)
- Brake Hose Material: Stainless Steel (durable, corrosion-resistant, and more reliable than rubber hoses for long-term automotive use)
- Master Cylinder Included: No
- Brake Booster Included: No
- Front Spindles Included: No
Professional installation is recommended.
Please check the part number and illustrations carefully to ensure that it fits your model. If you are not sure, please contact us and we will respond as soon as possible.
★Professional Seller★ ☑Quality Assurance☑ ✈︎Fast Shipping✈︎ ☺Efficient Service☺
- Shipping Policy
- Payment Method
- Returns Policy
- FAQ
Shipping Policy
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your or Paypal address. Please make sure your and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
Payment Method
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of sale closing.
Returns Policy
-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with messages,we will offer you refund or />On May 27, 2026 at 01:55:51 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.