Borg-Warner T86E-1A 3 Speed Transmission with R10B Overdrive.
I have included pictures and video of all gears on thecluster / countershaft and upper gears for anyone that needs them. Along withvideos of me shifting the gears with the cover removed as I rotate the inputshaft by hand.
10 spline 1-1/8 input shaft by 6-1/4\" long from face ofmounting surface to bellhousing
6\" horizontal by 5-3/4\" vertical bolt pattern forthe trans to bellhousing.
Pilot bearing shaft diameter 5/8\"
Overall length from bellhousing mating surface to end ofU-joint flange is 20-3/4\"
Rear U-joint flange takes a 1310 series U-joint, 3.2\"inside measurement between the nubs that hold the clips in place and 1.062diameter caps.
It will need the synchronizer keys, one is worn, one ismissing. But everything else visible with the top cover removed looks great.
According to Google, these came in Studebaker V-8s mid tolate 1950s.
56/57 Nash Ambassador and Hudson Hornet V8
57-60 Rambler Rebel and Ambassador V8
55-58 Studebaker President and Commander V8
And Packard shared this toward the end of the Studebaker /Packard era for the V8 Models 55-56.
The Ford Borg-Warner T10 and Toploader manual shared thefront mounting pattern of this as well and these transmissions can be used to have an overdrive in an old vehicle.
The T86-1A is the heavy duty version of the 3 speedtransmission of the Borg Warner series for that era.
Sold As Is, examine all the pictures and video of thistransmission to understand what you will receive.
Due to the high cost of the shipping, I recommend you pick this up. I am in North Alabama. But has to be paid in advance via .
However, as you can see, I have a sturdy wooden box ready to ship and it will be wrapped in a plastic bag such that the small amount of gear oil remaining doesn\'t contaminate anything.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.