Bogen V35 Power Vector Modular Amplifier 35W

Bogen\'s Power Vector modular amplifiers offer a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.

Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.An11-segment LED output meter monitors output signal level.

Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

• 5 models ranging from 35W to 250W with a large power reserve
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal processing plug-in output modules
• 4 levels of priority between modules
• 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
• Motorized master volume control that can be remotely operated
• Bass and treble controls
• Two-color LED for each channel indicates input active/clipping
• Lockable switch permits user to select either transformer- coupled outputs or a direct low-impedance output
• 5-position barrier strip, with clamping washers, provides connections for speaker loads
• Master mute function overrides all audio from the mixer section of the amplifier
• Screw terminal for master mute and remote volume control functions
• Each of the 8 module bays has an associated independent volume control
• Bass and treble control bypass switch (located in module bay 6)
• 125 Hz Lo-cut feature (switch located in module bay 6)
• Signal processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input
• Pre-EQ unbalanced buffer output signal “post” all unit controls, but “pre” any external signal processing equipment connected
• Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment
• Remote volume control panel (RVCP) (sold separately)
• Security cover to protect volume, bass, and treble controls (PVSC) (sold separately)
• Rack mountable (rack mounting kit RPK87 sold separately)
• 2 rack spaces high (3-1/2\")

• Power Output (RMS):
  • Rated:35W
  • Typical @ 1 kHz: 45W
• Frequency Response:
  • Transformer: 45-20 kHz; 0/-2dB
  • Direct: 20-20 kHz; 0/-1 0.1% (.05 typical @ 1 -94dB
  • With Aux Module: -70 dB
  • With Mic Module: -60 dB
  • With Tel Module: -70 dB
• Tone Controls:
  • Bass Frequency: 100 Hz (+/- 10 dB minimum)
  • Treble Frequency: 10 kHz (+/- 10 dB minimum)
  • Low Cut Frequency: 125 Hz @ -6 0.4V (at module bay connector)
  • Output Regulation: 2 dB or better, no load to full load
  • Output Impedance:
    • Transformer-Coupled: 70V, 25V, 8ohms (bal or unbal)
    • Direct Coupled: 4 \"OUT\" Level: 1VRMS (@FRP)
    • Insert \"OUT\" Impedance: 50 ohms maximum
    • Insert \"IN\" Sensitivity:1VRMS
    • Insert \"IN\" Impedance: 10k ohms minimum
  • Pre-EQ Output:
    • Output Level: 4VRMS(@FRP)
    • Output Impedance: 50 ohms maximum
  • AC Power Receptacle: 500 watts maximum power, unswitched
  • AC Voltage: 120V AC, 60Hz
  • AC Current: 0.6A
  • Dimensions (WxHxD): 16.5\" x 3.5\" x 12\"
  • Weight: 24 lbs.