Introducing a way to prolong the life and longevity of your stock Traxxas Maxx body. This upgrade kit reinforces crucial parts of the Maxx that often take the brunt of the impacts/damages. The hood and roof skids are great for those over dramatic underside slides, and the rear section is great for bad/off center landings. Does not interfere with rear body latch or rear spoiler/mounting systems.
Roof Skid -- Remove factory roof skid, set stock hardware aside. Place our roof skid in its place, use included M3x16 screws to secure (recommended to hand-tighten/low torque).
Rear Body Section - Line up the rear body parts on the sides like shown in the photos, use a sharpie to mark the 7 holes on each side, then drill through with an m3 drill, and then install the parts with the included m3x12 hardware and locknuts. (save the 2x M3x16 screws for securing hood section).
Hood/Nose - remove the factory screws that hold the skeleton underbody, place our nose protector in its place, locate the 3 screw holes and using a sharpie, mark points to then drill with an m3 drill and then install with the included hard and locknuts (the 2x longer screws are used for the securing of the skeletal underbody.)
Compatibility
Traxxas Maxx
Original Part #
Fits onto stock Traxxas part #8918 (TRA8918)
Fits onto stock Traxxas part #8911 (TRA8911)
*Package Includes*
1x Hood Skid
1x Roof Skid
2x Rear Outer Skids
2x Rear Inner Skids
1x Set of Mounting Hardware (20x M3x12 + M3 Nuts; 6x M3x16)
*Only works on the Maxx v2 bodies*
Photo Creds - Michael S.
100% USA-based, No dropship delays.
Bundling here? Limited by platform rules.
Bundling where we set the rules? Combined shipping savings + free at $49+ + often no tax hit.
That version\'s right where you\'d expect it to be :)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.