Blue Wave Arctic Armor 20x40-ft Rectangular In-Ground Pool Winter Cover

• Heavy-Duty Winter Protection: This heavy-duty pool cover is built from tear-resistant 7x7 scrim woven polyethylene that handles harsh off-season weather
• Extends Cover Life, Blocks Sunlight: Built with heat-sealed seams, this swimming pool cover ensures a watertight bond, blocking leaves, debris and rain while extending cover life; the black underside blocks sunlight to help inhibit dirt buildup
• Stays Secure in Wind and Snow: The sewn loops every 4 ft around the inground pool cover allow you to secure it with water tubes (sold separately) for a snugger fit, with no deck anchors required
• Minimizes Water Evaporation: This solid construction of this rectangular pool tarp helps retain water by limiting exposure to air, reducing evaporation over winter
• Proper Handling and Care: Simply clear the buildup from the pool edge with a soft-bristle broom after a heavy snow, or use a cover pump to remove standing water that collects on top of the pool winter cover after storms
• Debris Cover, Not a Safety Cover: This in ground pool cover is built to keep out the elements through the off-season; it is not made for foot traffic and should never be walked on or used to support weight
• Securing Hardware Included: This pool cover for inground pools comes with a vinyl-coated cable and metal winch that thread through grommets every 2 ft for straightforward installation

Closing an in-ground pool for winter should not mean a green pool or hours of cleanup in spring. The Blue Wave Arctic Armor 20 ft x 40 ft Rectangular In-Ground Pool Cover is a heavy-duty solid pool tarp cover built to handle what the off-season brings, so the pool opens cleaner when it is time to reopen.

It’s made with a 7x7 scrim count woven polyethylene, a dense material that forms a solid barrier against leaves, twigs, rain, and snow. The reinforced, heat-sealed seams run across the cover to lock out water, resist splitting, and help block moisture and debris. Because the panel is solid rather than mesh, water collects on top instead of draining through, and the black underside limits sunlight through the off-season to help slow dirt buildup and reduce cleanup at opening.

This swimming pool cover is sized for 20 ft x 40 ft rectangular in-ground pools, with an extra 5-ft overlap that extends beyond the pool edge on every side. The grommets every 2 ft accept the included vinyl-coated cable and metal winch to cinch the cover down, and sewn water tube loops every 4 ft around the perimeter allow you to anchor the cover with water tubes (sold separately) for a snug, steady fit without deck anchors. A second person makes installation faster on a pool this size.

This is a winter debris cover, not a safety cover. Do not walk on it or allow it to support weight. A layer of water on top is normal and helps hold the cover in place against wind; a cover pump (sold separately) can clear excess after heavy snow.