Each letter is 2.3 inches high. Width varies. Approx 2 to 2.5 inches wideEasy iron on instructions sent with every order
1. Preheatiron to cotton setting. Heat Press 320
2. Put cardboard in between shirt so therhinestone glue doesn’t go through to the back of the shirt. ORthe parchment paper sent with this order
3. Peel offtextured backing from the design (stones should stick to the clear plasticsheet). If any stones have shifted out of place, put them back in placeusing tweezers.
4. Placeplastic sheet, stone side down on fabric and press into place with hand. Theclear plastic sheet should stick to the fabric.
5. Placeiron over design area and apply steady pressure for 15-30 seconds - DO NOT MOVEIRON AROUND AS STONES MAY SHIFT –
6. Turn Garment WRONG SIDE OUT and Place ironover design area for another 15 seconds and repeat.
7. Set asideand allow to cool for 3 to 5 minutes.
8. Turnfabric to right side out. Slowly and carefully peel the clear plastic sheetaway from the fabric. If all stones are not sticking, you may re-iron on the regularside of the fabric again.
*** Thesehot fix and iron on rhinestones and transfers are not intended for use by ornear small children. Please do not allow children access to these products.
*****Wear ToStart is NOT responsible for garments for any reason. Look over carefully priorto ironing. Make sure the back of the transfer is free of plastic or debris.Use tweezers to remove any unwanted materials that might have been missed fromthe transfer, or to put the rhinestone back in place if they moved fromoriginal location on the carrier.****If the top carriermelts, your iron is too hot. Do a test first!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.