Black Faceplate, for Nintendo DS Lite Gameboy Macro, Top Screen, 2 Buttons
- Fit — Compatible with Nintendo DS Lite Gameboy Macro top-screen conversions. This black plastic faceplate forms the front housing, with openings for the display and a two-button control layout.
- Screen Layout — Uses the console\'s top screen instead of its bottom screen. The conversion requires cutting contacts to enable this layout; this is not a direct replacement for an unmodified console faceplate.
- Assembly — The conversion requires soldering a speaker and a 330 Ohm resistor to the motherboard. Gently fold the screen cable while positioning the display.
- Additional Materials — Cover the screen\'s metal back with tape to separate it from the motherboard. Use a cap, transparent glue or silicone to cover the light indicator. These materials are not included.
- Included — One faceplate only. Speaker, resistor, screws, bolts, nuts, anchors, tape, adhesive, adapters, cables and all other hardware are excluded. Depending on the setup, reuse original hardware or obtain suitable hardware separately.
SplashNColor black plastic faceplate for a handheld-console conversion. Compatible with Nintendo DS Lite Gameboy Macro top-screen conversions. The faceplate forms the front housing around the display and controls and has a two-button layout.
The conversion uses the console\'s top screen rather than its bottom screen and requires cutting contacts for the screen substitution. It also requires soldering the speaker specified in the title and a 330 Ohm resistor to the motherboard. The speaker reference in the title identifies a separately required component, not the console that this faceplate fits.
During assembly, gently fold the screen cable while positioning the display. Cover the screen\'s metal back with tape to keep it from contacting the motherboard. Cover the light indicator with a cap, transparent glue or silicone.
Included: one faceplate only. The speaker, 330 Ohm resistor, indicator cap, transparent glue or silicone and tape must be obtained separately. No screws, bolts, nuts, anchors, adhesive, adapters, cables or other hardware are included.
Fitting depends on your conversion and existing components. Attaching the faceplate may require original screws or separately purchased screws, bolts, tape or adhesive suited to your setup. This part requires modification and assembly rather than direct installation on an unmodified console.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.