|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Bidirectional Flow Restrictor Valve STB-G3/8 3/8 L08 for Mini Excavator
$26.29

Hydraulic Flow Control Valve STB-G3/8 Mini Excavator Cylinder Speed Control Kit DESCRIPTION About The Item Jerky hydraulics making your machine lurch and hard to control? This STB-G3/8 hydraulic flow control valve installs in line to smooth out and fine-tune cylinder speed on your mini excavator or other DIN metric machine. Built with a chrome plated alloy steel body, G thread connections, and both G1/4 and M14 adapters included, this flow control valve puts dial-in control of every cylinder motion right where you need it. Features - SMOOTH OUT JERKY CONTROLS: No more sudden lurches mid-dig. This hydraulic flow control valve settles your mini excavator\'s cylinder motion into steady, predictable movement, so precision work near utilities, walls and finished surfaces stops being a gamble.
- FINE-TUNE CYLINDER SPEED: Dial the flow in line to the cylinder you want to control, and attachments move at the speed you choose - not the speed the pump hands you.
- BOTH FITTING OPTIONS IN ONE KIT: Comes with 2x G1/4 and 2x M14 inner & outer thread adapters, covering the S1204 1/4\" and S1014 M14 fitting types - no extra parts to order.
- READY TO HOOK UP: Pre-adapted from DIN tube male L08 to DIN tube female swivel L08, this flow control valve fits DIN metric machines with L08 M14 connections as shown in the pictures.
- CHROME PLATED ALLOY STEEL: Silver chrome plated surface over alloy steel for a hard-wearing, rust-resistant finish that stands up to jobsite duty.
- SIMPLE IN-LINE INSTALLATION: Just connect it in line to whatever cylinder you want to control the flow to - no machine modification needed.
- RUN TWO FOR FULL CONTROL: Most operators run 2 of these on their machine, one per cylinder circuit, for balanced two-motion NameHydraulic Flow Control Valve (cylinder speed control valve)ModelSTB-G3/8ConnectionDIN tube external thread L08 to DIN tube internal thread rotary (swivel) joint L08, two-sided connectorsThread StandardG threadMaterialAlloy steel, chrome platedColorSilverFitting Option 1S1204 1/4\" / S1206 3/8\" / S1206 G3/8\" - joint size 11.17 x 8.44 x 3.19 cm; end thread diameter 12.9 mm; end port caliber 11.4 mm; center thread 2.47 cmFitting Option 2S1014 M14 / S1206 3/8\" / S1206 G3/8\" - joint size 10.99 x 8.44 x 3.19 cm; end thread diameter 13.8 mm; end port caliber 12.6 mm; center thread 2.47 cmFitmentFor mini excavator and engineering vehicles with DIN metric L08 M14 connectionsPackage Includes1 x Flow Control Valve STB-G3/8, 2 x G1/4 inner & outer threads, 2 x M14 inner & outer threads (1 complete kit)Usage Scenarios
- Mini excavator work: keep thumb, grapple or bucket cylinders moving steadily for trenching, lifting and backfilling.
- Controlled attachment drop: meter the return flow so attachments settle gently instead of slamming down.
- Retrofit and repair: add speed control to older DIN metric machines with L08 M14 ports instead of replacing whole valve blocks.
- Engineering vehicles: install in line on any hydraulic cylinder circuit you want to meter - one valve per motion.
- Two-valve setup: most operators run 2 of these on their machine for smooth, balanced control of both working motions.
Notice & Q&ANOTICE: - Please check the compatibility information, item specifics and pictures to confirm your mini excavator uses DIN metric L08 M14 connections before ordering.
- Instruction not included. Professional installation is always recommended.
- Actual silver chrome finish may show slight color difference from photos due to lighting and screen settings.
Q1: Will this flow control valve fit my mini excavator? A1: It fits DIN metric machines with L08 M14 connections as shown in the pictures. Please verify your fittings before ordering. Q2: How many valves do I need? A2: Most operators run 2 of these for their machine - one per cylinder circuit. Q3: What adapters are included? A3: 2x G1/4 and 2x M14 inner & outer thread adapters, covering both fitting options. Q4: Is an installation guide included? A4: No. Instruction not included; professional installation is recommended.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|