The Benelli M4 Wolff Spring is custom designed and manufactured to our specifications specifically for use with 7-round capacity magazine tubes. The purpose of these increased power magazine springs is to improve the reliability of your shotgun, while also increasing room in the magazine tube by about 1/10th of an inch compared to the OEM spring.
The OEM Spring that comes factory with your Benelli M4 works well when new but tends to take a set quickly and becomes underpowered. The Wolff magazine springs are designed to be slightly overpowered when new, but just right once they take a set.
Underpowered springs don’t eject the shell far enough into the loading gate from the magazine tube, and can cause failure to feed. This is especially true with lighter loads and 3” shells. The problem occurs when shell isn’t ejected far enough, and the tip of the shell makes contact with the receiver to where the loading gate gets jammed.
If you are using your Benelli M4 for home defense or any other high stakes situation, is highly recommended to upgrade your magazine spring. Test the factory spring at the range, and if it works fine, there is no need to upgrade to the Wolff spring.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.