|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Belltech 6203 4in Rear Lowering Block Kit 2-Degree Taper Universal Mini Mid-Size
$100.95

New Belltech 6203 rear lowering block kit delivers a 4-inch drop for compatible mini and midsize 2WD trucks. Strong, lightweight extruded aluminum with 2° taper to help correct driveline angle. Includes blocks, Grade 8 U-bolts and hardware. Fits 2.5- or 3-inch leaf springs and axle tubes up to 3 inches. Check vehicle fitment before - AUTHORIZED DEALER - AUTHENTICPART Part Brand: Belltech Part Number: 6203 Vehicle Fitment - Universal — fits most mini and mid-size 2WD trucks with 2.5\" or 3\" wide leaf springs and up to 3\" diameter axle tube
- Common applications include: Chevrolet S-10 / GMC S-15/Sonoma/Blazer/Jimmy, Nissan D21 Hardbody, Toyota Pickup (pre-1995), Ford Ranger, Mazda B-Series, Isuzu Hombre, and similar compact trucks
Fitment Notes - Fits leaf spring widths of 2.5 inches and 3.0 inches
- Fits axle tube diameters up to 3 inches — does NOT fit trucks with axle tubes larger than 3\" (e.g. Dodge Dakota, full-size C/K trucks, Nissan Frontier 2001+)
- Does NOT fit 1999+ Toyota Tacoma 2WD — axle geometry incompatible
- Features an integrated 2° anti-squat taper for driveline angle correction after lowering
- At 4 inches of drop, a C-notch or frame modification may be required on some applications to prevent axle-to-frame contact at full suspension compression — verify clearance before installation
- Requires axle-over-leaf spring configuration
- Installation time: approximately 2–3 hours
- Sold as a kit — includes two blocks, U-bolts, and all hardware
Features - Lowers rear ride height by 4 inches — the maximum drop available in the Belltech universal block kit lineup
- Integrated 2° anti-squat taper corrects driveline angle to reduce vibration and U-joint wear after lowering
- Extruded aluminum construction — stronger and lighter than cast aluminum or steel blocks
- Wider block profile (3\" overall width) provides a stable mounting surface at the increased block height
- Works with 2.5\" or 3\" wide leaf springs and axle tubes up to 3\" in diameter
- Includes grade 8 U-bolts, Nyloc nuts, and washers — complete hardware kit included
- Direct bolt-in installation — no drilling or chassis modification required for the blocks themselves
- Backed by Belltech\'s Limited Lifetime Warranty
Specifications - Application: Universal (mini/mid-size trucks)
- Position: Rear
- Drop Height: 4 inches
- Block Material: Extruded Aluminum
- Block Width: 3.0 inches (overall)
- Taper: 2 degrees (anti-squat)
- Leaf Spring Width Compatibility: 2.5 inches and 3.0 inches
- Axle Tube Diameter: Up to 3 inches (max)
- Installation Time: 2–3 Hours
- Sold: As a Kit (pair of blocks + U-bolts + hardware)
- Warranty: Limited Lifetime
Included Components - 2x Extruded Aluminum Lowering Blocks (4\" drop, 2° taper)
- 4x Grade 8 U-Bolts
- Nyloc Nuts and Washers
- 1x Installation Instruction Sheet
Product Description The Belltech 6203 is a universal 4-inch rear aluminum lowering block kit with an integrated 2° anti-squat taper, representing the maximum drop in Belltech\'s universal block kit lineup. Designed for most mini and mid-size trucks with 2.5\" or 3\" wide leaf springs and axle tubes up to 3\" in diameter, the 6203 delivers a dramatic 4-inch rear drop through a straightforward bolt-in installation. The wider 3\" block profile provides a stable mounting base at the increased block height. The built-in 2° taper corrects the driveline angle shift that occurs with significant rear drops, reducing vibration and preserving U-joint life. Does NOT fit trucks with axle tubes larger than 3\" — including Dodge Dakota, Nissan Frontier 2001+, or full-size C/K trucks. Does not fit 1999+ Toyota Tacoma 2WD. At 4 inches of drop, verify that adequate frame-to-axle clearance exists at full suspension compression — a C-notch may be required on some applications. Backed by Belltech\'s Limited Lifetime Warranty. *Parts are for USA spec vehicles, please contact us to verify fitment on JDM & international models. · · · SHIPPING · · ·
- Free shipping across the contiguous 48 United States (excludes Hawaii and Alaska). Item(s) ships on the same day or within 1 business day. Delivery time is within 2 to 4 business days excluding next day deliveries. Orders over $750 require signature for delivery.
- Canada customers - If does not collect import & duty fees during checkout, the shipping carrier will collect them prior to delivery.
· · · RETURNS · · ·
Your complete shopping satisfaction is our #1 priority. If an item you ordered from us does not meet your expectations, please contact us within 30 days of receiving the item(s). If your order arrives damaged from shipping please contact us and we will provide a prepaid return label to send back for a replacement or refund. - Returned items must be in the original packaging (including plastic wrapped items) and in brand new condition.
- Any returns received installed, mounted, used or missing components will be subject to return fee\'s.
· · · PAYMENTS · · ·
- We accept all payment methods through \'s payment system
- PayPal, and all major credit cards/debit cards are accepted.
· · · response · · ·
- Customer satisfaction is a top priority for us. If you have any issues with your order, please let us know. We will make every effort to resolve any problems and ensure you are satisfied.
· · · CONTACT US · · ·
- We appreciate your business. If you have any questions, please message us through and we will respond within 24 hours on weekdays. Feel free to browse our store for other available items. Thank you again for choosing to shop with us!
Powered By 3Dsellers.com - Try for Free!

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|