Brand New. Factory Sealed. Warranty. Fast Free ShippingBeckhoff EL6910 EtherCAT Terminal communication interface, TwinSAFE Logic
The EL6910 represents the new generation of dedicated safety controllers. While the EL6900 as its predecessor provided only function blocks based on Boolean values, the EL6910 offers a wide variety of certified function blocks that enable the safe processing of analog values and thus the implementation of even more complex safety applications.
In addition to the extension of the processable data types, the so-called customizing function has been established in order to be able to appropriately map current requirements for non-safety-oriented applications with regard to modularization and dynamization in the field of safety technology too. Customizing allows modules of the safety application to be configured so that they are capable of being permanently or temporarily disabled. The disablement or re-enablement can also take place subsequently at runtime.
The EL6910 TwinSAFE Logic can establish 212 connections to other devices. In addition to safe communication connections via FSoE, connections via PROFIsafe are also possible (master and slave). TwinSAFE SC technology is also supported. This technology allows analog signals from the actual standard EtherCAT I/Os (with the identifier -009x) to be safely transmitted to a TwinSAFE Logic-capable component and used there to check the plausibility of this analog signal and to use it in terms of safety using another diversified analog signal (usually up to PL d).
Another highlight of the introduction of the new controller generation is the incremental download. In contrast to its predecessor, the safety project now consists of four components (logic, parameters, mapping, info data), each of which has its own checksum. Thus, in the event of a change to the safety project, an effect analysis can be performed on the basis of these sub-checksums. This simplifies the validation and verification of the safety project. This division is also reflected in the extended user management, so that rights can now be granted on the basis of different components (e.g., a user who can only change the information data of a safety project).
Finally, the new generation of safety controllers now has a diagnostic history directly on the component. All errors that have occurred can be read directly from the component and evaluated.
The EL6910 is programmed using the TwinCAT 3 Safety Editor.
Special features:
- analog value processing
- incremental download
- diagnostic history directly on the component
- up to 212 safe connections
- up to 128 TwinSAFE groups
- up to 512 function blocks
- up to 40 users
- PROFIsafe master and slave support
- TwinSAFE SC support
- Technical dataEL6910Specificationlink unit between safe input and output signalsProtocolTwinSAFE/Safety over EtherCATCycle timeapprox. 1 ms/according to project sizeFault response time≤ watchdog time (parameterizable)Current consumption power contacts–Current consumption E-bustyp. 160 mAInstallation positionhorizontalSafety standardEN ISO 13849-1:2015 (Cat. 4, PL e) and EN 61508:2010 (SIL 3)Weightapprox. 50 gProtection ratingIP20Ex markingATEX:
II 3G Ex ec IIC T4 Gc
IECEx:
Ex ec IIC T4 Gc
cFMus:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec IIC T4 GcTo topHousing dataEL-12-8pinDesign formcompact terminal housing with signal LEDsMaterialpolycarbonateInstallationon 35 mm DIN rail, conforming to EN 60715 with lockSide by side mounting by means ofdouble slot and key connectionMarkinglabeling of the BZxxxx seriesWiringsolid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriverConnection cross-sections*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²Connection cross-section AWGs*: AWG28…14,
st*: AWG28…14,
f*: AWG26…16Stripping length8…9 mmCurrent load power contactsImax: 10 ADimensions (W x H x D)12 mm x 100 mm x 68 mm
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.