BTMETER 7200APP 6000 Counts True RMS Clamp Multimeter AC/DC Bluetooth NCV

• BLUETOOTH APP + DATA LOGGING — Monitor live readings on your phone from up to 50 ft (15 m) away using the free \"Intelligent Meter\" app. Record sessions, track Max/Min with timestamps, and export data for reports.• TRUE AC AND DC CURRENT (400A) — Most clamp meters read AC only. This one measures both with True RMS accuracy — perfect for automotive parasitic drain tests, alternator checks, solar panel troubleshooting, and industrial equipment.• ONE TOOL, FULL DIAGNOSTIC SUITE — Voltage (600V AC/DC), Resistance (60MΩ), Capacitance (60mF), Frequency (10MHz), Duty Cycle (0.1%–99.9%), and Temperature (−4°F to 1832°F). Includes a K-type thermocouple probe.• BUILT-IN WORK LIGHT + NCV DETECTION — Long-press HOLD to light up dark panels and engine bays with a bright LED lamp. The NCV sensor

BTMETER 7200APP 6000 Counts True RMS Clamp Multimeter AC/DC Bluetooth NCV

⚡ BTMETER BT-7200-APP — TRUE RMS CLAMP MULTIMETER WITH BLUETOOTH ⚡

🎯 WHY THE BT-7200-APP BELONGS IN YOUR TOOLBOX

When you need a smart, versatile clamp meter that doesn\'t cut corners — and doesn\'t cost three times as much — the BTMETER BT-7200-APP is the clear pick. Here\'s what it does for you.

📱 SMART FEATURES THAT MAKE YOU LOOK PROFESSIONAL

You get Bluetooth data logging and real-time remote monitoring — features normally reserved for meters costing far more. Place the meter, close the panel, and read everything safely on your phone. The free app lets you track trends, timestamp your readings, and share data with clients or colleagues. No more holding your breath and twisting your neck to read a tiny screen in a cramped panel.

🔋 TRUE AC/DC CURRENT — NOT JUST AC

Unlike many clamp meters that measure AC current only, the BT-7200-APP handles both AC and DC current up to 400A with True RMS accuracy. That makes it the right tool for:

• 🚗 Automotive parasitic drain tests — measure DC current draw to hunt down a battery drain.
• ⚙️ Alternator output checks — verify charging current in seconds.
• ☀️ Solar panel troubleshooting — confirm DC current and voltage at the panel and the charge controller.
• 🏭 Industrial equipment — trust True RMS accuracy on non-sinusoidal loads.

🛠️ BUILT FOR THE TRADES YOU ACTUALLY WORK IN

• ⚡ Electricians: Safely clamp around live wires, use NCV to trace hidden voltage, and monitor panels from a safe distance via your phone.
• 🚙 Automotive Technicians: Measure DC current draw for parasitic battery drains, test alternator output, and check component temperatures — all with one tool.
• ❄️ HVAC-R Professionals: Test run capacitors (up to 60mF), verify flue temps with the K-type probe, and check vent temperatures instantly.
• 🔆 DIY Solar Installers: Verify panel output (DC current/voltage) and troubleshoot charge controllers with True RMS accuracy.

🧰 COMPLETE DIAGNOSTIC POWER IN ONE HAND

Why carry a separate multimeter, capacitance tester, and thermometer? The BT-7200-APP replaces them all. From checking diodes to measuring duty cycle on a PWM signal, you\'re covered — and the backlit 6000-count display keeps every symbol readable at a glance.

🔦 WORK CONFIDENTLY IN ANY LIGHT

The backlit display is great, but the built-in LED lamp is a game-changer. Working in a dark attic or under a dashboard? Just press and hold HOLD to light up your work area. The lamp even flashes with the continuity buzzer, so you never miss a beep.

📊 PRODUCT PARAMETERS🖥️ Display6000 counts backlit LCD, full symbol display⚡ DC Voltage600mV / 6V / 60V / 600V ±(0.5% + 2 digits)⚡ AC Voltage (True RMS)6V / 60V / 600V ±(1.0% + 3 digits)🔋 DC Current60A / 400A ±(2.5% + 10 digits)🔋 AC Current (True RMS)60A / 400A ±(2.5% + 10 digits)📏 Resistance600Ω / 6kΩ / 60kΩ / 600kΩ / 6MΩ / 60MΩ🔌 Capacitance6nF to 60mF📡 FrequencyUp to 9.999MHz ±(0.1% + 5 digits)🌡️ Temperature−4°F to 1832°F (−20°C to 1000°C), K-type probe included🔊 Continuity<50Ω threshold, audible buzzer + lamp flash🛡️ Safety RatingCAT II 600V📐 Jaw Opening26mm (fits one 4 AWG wire)📶 ConnectivityBluetooth, up to 50 ft (15 m)📲 AppFree \"Intelligent Meter\" app📦 WHAT\'S IN THE BOX

• ✅ 1 × BTMETER BT-7200-APP Clamp Multimeter
• ✅ 1 × Pair of Test Leads (600V rated)
• ✅ 1 × K-Type Thermocouple Temperature Probe
• ✅ 1 × User Manual (English)

⚠️ NOTE: Please refer to the included instruction manual for complete safety guidelines and operating procedures. Product specifications and appearance are subject to the actual item received. ClampDisplayDigitalTest/Measurement FunctionsAC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance, Duty Cycle, Frequency (Hz)Current Range60A-400AForm FactorHandheldMeasurement CategoryCAT II 600VResistance RangeUp to 60M Ohm