BSS FDS-360 analogue active crossover / frequency dividing system with limiters. Includes three (3) frequency cards as shown.
Vintage professional BSS analogue crossover in fully configurable 4-band format. These were built for professional PA and installed sound applications and use interchangeable frequency cards to configure crossover points and response.
This unit has been signal tested using an audio source and amplifier. Both Channel 1 and Channel 2 inputs were confirmed working, and signal was verified through all four band outputs. Output was clean during testing, with no obvious noise or distortion. Front-panel mute / mono switching and gain was also checked for basic operation.
This was a functional signal test rather than a full laboratory calibration or comprehensive service evaluation. Given the age of the unit, it is being sold as-is and without returns.
The frequency cards presently installed are shown clearly in the photos. The FDS-360 is highly configurable, and alternative frequency cards can be fitted or configured for other crossover frequencies.
Cosmetically, this is well-used vintage professional equipment. The chassis and rack ears show scratches, marks, paint wear and some surface corrosion consistent with years of rack use. Please review the photographs carefully, as they form part of the description. Nothing has been cosmetically restored or disguised.
Need two? Check my other listings. I have another BSS FDS-360 available separately.
This is for unit 1 of 2 available. Selling individually.
BSS FDS-360 – Key Features
The FDS-360 is a programmable electronic crossover / frequency-dividing system designed for professional sound reinforcement, with:
Stereo 2-way or mono 3-way / 4-way operation
Independent limiter for each frequency band
Individual polarity switching for each band
LED signal and limiter monitoring
Band insertion points for external EQ or time-delay processing
Adjustable band-edge phase control providing up to 360° of correction
Plug-in frequency cards determining crossover frequency, slope and filter response
24 dB/octave Linkwitz-Riley filters supplied as standard
Support for 12, 18 or 24 dB/octave filter configurations
Internal equalization options
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.