Linear Guide Block BRH30A 30mm Slider for ABBA BRH30 Rail
30 Size · 42 × 90 × 109 mm · 72 × 52 mm M10 Mount · Rail Not Included
Highlights
This is a 30 size heavy load linear guide block in the standard A style, with four tapped mounting holes on the top face, and it runs on a 28 mm wide rail with an 80 mm hole pitch. The block measures 42 mm high, 90 mm wide and 109 mm long, with a 72 × 52 mm hole pattern tapped M10, and its four ball rows sit at a 45 degree contact angle so load is carried equally in the radial, reverse radial and side directions. A M6 × 1 grease nipple is supplied with the block for relubrication. The rail is not included, this listing is for the block only. The laser marking also carries a production code, which is a lot number and not a part number.
Specifications
Product Type: Linear Guide Block
MPN: BRH30A
OE/OEM Part Number: BRH30A
Block Series: BRH, Heavy Load
Rail Size: 30 mm
Block Style: A (Standard Length)
Mounting Hole Pattern: 72 × 52 mm
Mounting Thread: M10 × 12 mm deep
Dynamic Load Rating: 29.2 kN / 2,980 kgf
Static Load Rating: 53.8 kN / 5,490 kgf
Block Height: 42 mm
Block Width: 90 mm
Block Length: 109 mm
Block Weight: 1.1 kg / 2.4 lb
Lubrication: M6 × 1 Grease Nipple
Items Included: 1 Linear Guide Block, 1 Grease Nipple
Fitment
This block fits 30 size rail with a 28 mm rail width, 80 mm hole pitch and 9 × 14 × 12 mm counterbored mounting holes:
For ABBA BRH30 rail, 30 mm size, rail width 28 mm
Rail hole pitch 80 mm, rail bolt holes 9 × 14 × 12 mm
Rail height 26 mm, four ball rows, 45 degree contact angle
Block only, the rail is not included in this listing
Package
1 × Linear Guide Block
1 × Grease Nipple
Please Check Before Ordering
Check that your rail is 30 size with a 28 mm width and an 80 mm hole pitch before ordering, and note that this block body is 109 mm long, so confirm clearance on machines that use a shorter 30 size block. The rail is not part of this listing, only the block is supplied. The four mounting holes are tapped M10 for bolts from the top, while the rail is fixed with M8 bolts through the 9 × 14 × 12 mm counterbored holes. Apply grease through the M6 × 1 nipple before running the block and leave the end seals in place until the block is on the rail. The laser marking shows BRH30A plus a production code such as GDF08421419, which is a lot number and not a part number. For questions, please contact us through messages.
After-Sales Service
Warranty: 3-Year Warranty
Returns: 30-Day Free Returns
Shipping: Fast Shipping from the United States
On Nov 3, 2026 at 23:39:33 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.