BMR Suspension CAB005R Control Arm Relocation Brackets Red for 05-14 Mustang
The CAB005Rs allow you lower the lower control arms\' rear mounting position by as much as 3 inches, correcting the control arm angles.
Launching harder, reducing wheel hop, and repositioning the instant center on your S197 Mustang is easy with lower control arm relocation brackets from BMR Suspension. BMR\'s bolt-on relocation brackets for S197 Mustangs are the ultimate in strength and adjustability. The stock lower control arm mounting location can give you insufficient lower control arm angle on lowered vehicles. BMR\'s control arm relocation brackets allow you to correct the lower control arm angle, correcting the rear suspension geometry and allowing you to add anti-squat for increased traction. Manufactured from heavy-duty 3/16- and 1/4-inch laser cut, CNC-formed steel plate, the CAB005R are designed to bolt in place, making installation simple and easy. The stock control arm mounting position is fine for stock height vehicles, but once you lower your car, the control arms change and need to be corrected. The CAB005Rs allow you lower the lower control arms\' rear mounting position by as much as 3 inches, correcting the control arm angles. This also allows you to make instant center changes for race applications. BMR Suspension designed the CAB005R to work well in street performance, drag race, and road race applications. It is engineering to bolt on and stand up to extremely high horsepower and torque levels, as well as the hardest drag strip launches without moving on the rearend housing. When performance is a must, rely on BMR Suspension! BMR Suspension\'s CAB005 bolt-on lower control arm relocation brackets come uncoated. Installation time is about 2-3 hours. Proudly made in the U.S.A. The BMR Control Arm Relocation Brackets correct the vehicles instantaneous center, improving drag strip traction and handling traction during corner exiting. BMR can proudly claim that these Relocation Brackets are the only brackets in the industry that have been 1.1 sixty-foot times, BOLTED-ON! We also have many 1.2, 1.3 and 1.4 60-foot combinations running these same pieces.
Fits 2005-2014 S197 Mustang
Built from a blend of ?-inch and 3/16-inch Laser cut, CNC-formed steel plate
Bolt-on design, no welding required
Three height positions (234-inch drop over stock)
Designed to handle extreme power levels
Allows for corrected lower control arm angle on lowered vehicles
Allows for increased anti-squat
Increases traction
Designed for street performance, drag race, and road race applications
1-2 hour installation time
Proudly designed in the U.S.A.
Proudly made in the U.S.A.
Additional Information:
BMR 05-14 S197 Mustang Bolt-On Control Arm Relocation Brackets - Red
Finish: Red Powdercoat
Title: BMR Suspension CAB005R - Control Arm Relocation Brackets, Bolt-on - 2005-2014 Ford Mustang
Title: BMR Suspension CAB005R - Control Arm Relocation Brackets, Bolt-on - 2005-2014 Ford Mustang
Guaranteed Fitments:
2005-2014 Ford Mustang
BMR Suspension CAB005R Control Arm Relocation Brackets Red for 05-14 Mustang
Item Description
The CAB005Rs allow you lower the lower control arms\' rear mounting position by as much as 3 inches, correcting the control arm angles.
Launching harder, reducing wheel hop, and repositioning the instant center on your S197 Mustang is easy with lower control arm relocation brackets from BMR Suspension. BMR\'s bolt-on relocation brackets for S197 Mustangs are the ultimate in strength and adjustability. The stock lower control arm mounting location can give you insufficient lower control arm angle on lowered vehicles. BMR\'s control arm relocation brackets allow you to correct the lower control arm angle, correcting the rear suspension geometry and allowing you to add anti-squat for increased traction. Manufactured from heavy-duty 3/16- and 1/4-inch laser cut, CNC-formed steel plate, the CAB005R are designed to bolt in place, making installation simple and easy. The stock control arm mounting position is fine for stock height vehicles, but once you lower your car, the control arms change and need to be corrected. The CAB005Rs allow you lower the lower control arms\' rear mounting position by as much as 3 inches, correcting the control arm angles. This also allows you to make instant center changes for race applications. BMR Suspension designed the CAB005R to work well in street performance, drag race, and road race applications. It is engineering to bolt on and stand up to extremely high horsepower and torque levels, as well as the hardest drag strip launches without moving on the rearend housing. When performance is a must, rely on BMR Suspension! BMR Suspension\'s CAB005 bolt-on lower control arm relocation brackets come uncoated. Installation time is about 2-3 hours. Proudly made in the U.S.A. The BMR Control Arm Relocation Brackets correct the vehicles instantaneous center, improving drag strip traction and handling traction during corner exiting. BMR can proudly claim that these Relocation Brackets are the only brackets in the industry that have been 1.1 sixty-foot times, BOLTED-ON! We also have many 1.2, 1.3 and 1.4 60-foot combinations running these same pieces.
Fits 2005-2014 S197 Mustang
Built from a blend of ?-inch and 3/16-inch Laser cut, CNC-formed steel plate
Bolt-on design, no welding required
Three height positions (234-inch drop over stock)
Designed to handle extreme power levels
Allows for corrected lower control arm angle on lowered vehicles
Allows for increased anti-squat
Increases traction
Designed for street performance, drag race, and road race applications
1-2 hour installation time
Proudly designed in the U.S.A.
Proudly made in the U.S.A.
Additional Information:
BMR 05-14 S197 Mustang Bolt-On Control Arm Relocation Brackets - Red
Finish: Red Powdercoat
Title: BMR Suspension CAB005R - Control Arm Relocation Brackets, Bolt-on - 2005-2014 Ford Mustang
Title: BMR Suspension CAB005R - Control Arm Relocation Brackets, Bolt-on - 2005-2014 Ford Mustang
Guaranteed Fitments:
2005-2014 Ford Mustang
Shipping
We ship Monday-Friday and strive for orders to ship within 1-2 business days. We use UPS and FedEx for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible.
All orders will require a physical address, please provide this upon ordering to expedite the shipping process. Even with our huge inventory, we may run out of an item. If this is the case you will receive an email with an expected availability date.
Returns & Warranty
We offer 30 Day Free Returns. Refunds for returns will be given once the item has been received and inspected. Items must be New, Unused, Not Installed, in the Original Packaging and able to be resold. Incomplete returns may not be eligible for this policy. Please message us to start a return.
Warranty on product is replacement of part only for defects in materials and workmanship. No cash or compensation for labor will be given for defects in material and workmanship. Defective part must be returned in order for new part to be provided.
OUR COMMITMENT
We are committed to making sure that you leave this transaction satisfied.We value your response, and we strive to do everything we can toearn Five Stars and Positive response on every order. If you areunhappy with your purchase for any reason, please CONTACT US priorto leaving response so that we can make things right for you.
Contact Us
We encourage our Buyers to communicate with us at any time.Feel free to contact us directly through . All emails will be responded to within 24 hours.We look forward to hearing from you!
Powered By 3Dsellers.com - Try for Free!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.