BMR Rear Upper Control Arm Adjustable With Polyurethane Bushings Black Hammer...
$152.96

The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This \"3 link\" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle.
For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. BMR\'s upper control arm is made from 1 5/8\" x .120 wall DOM tube and is MIG welded, creating a structurally superior third link. BMR also uses the largest adjuster in the industry, 1-1/8\", for a bulletproof combination.
BMR has incorporated an application-specific, dual-durometer bushing. This 4-piece bushing utilizes a high-durometer center bushing to resist deflection under heavy loading and two outer, low-durometer bushings to allow articulation during handling. This makes the control arm equally at home on the drag strip, street, or road course.
Made in the USA.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.