NEPHELOstar PlusMicroplate nephelometer for light-scattering and turofferity measurements
The world’s first and only laser-based microplatenephelometerwas developed to meet high-throughput demands for fast compound solubility screens. The NEPHELOstar®Plusdetects insoluble particles in liquid samples by measuring forward scattered light and can be used for turofferity measurements, drug solubility screening, protein binding kinetics, microbial growth, and petroleum process control.
98 CitationsDetection modes
RatingsGreat instrument invaluable to our work flows.The Nephelostar is an important part of our workflow for SPR. All compounds are tested for...★★★★☆4.7/5.0 (2)RateAll reviewsProduct detailsReviewsApplication notesCitationsTechnical specificationsAccessoriesCompare readersNEPHELOstar PlusDetection Modes
Nephelometry (light scattering)
Measurement Modes
Endpoint and kinetic
Microplate Formats
Up to 384-well plates
Microplate Carrier
Robot compatible
Light Sources
Self-monitoring laser diode
Wavelength 635±10 nm
Stability <0.2% deviation
Lifetime 20,000 hours
Output: 1 mW
Selectable beam width: 1.5 to 3.5 mm
Selectable intensity 0-100%
Scattering angle: detects up to 80° full cone angle
Detectors
Side window photodiode detector
Wavelength Selection
Photodiode
Wavelength 635±10 nm
Sensitivity
Depending on particle size and liquid properties
Silica detection (particle size 0.5 to 10 µm) 800 nM
Dynamic Range: 5 decades
Maximum count rate (2,000,000 Relative Nephelometry Units (RNUs) per second)
Read Times
Depend on assay conditions and liquid surface stability
Shortest times possible: 16 s (96), 47 s (384)
Shaking
Linear, orbital, and double-orbital with user-definable time and speed
Purge Gas Vent
System to inject an atmosphere or to pull a vacuum into the reader
Incubation
+4 °C above ambient up to 45 °C
The upper heating plate of the incubation chamber operates at 0.5 °C more than the lower plate. This prevents condensation build-up on the lid or sealer
Software
Multi-user Reader Control and MARS Data Analysis Software included
FDA 21 CFR Part 11 compliant
Dimensions
Width: 44 cm, depth: 48 cm, height: 32 cm; weight: 25 kg
Reagent Injection
Up to 2 built-in reagent injectors
Injection at measurement position (6 to 384-well)
Individual injection volumes for each well (3 to 500 µL)
Variable injection speed up to 420 µL/s
Up to four injection events per well
Reagent back flushing
Power Requirements
- Input Voltage: 100-240 V, 50/60 Hz, max peak 300 VA
Power Consumption
- Instrument off: 0 W
- Normal operating conditions: 15 W
- Normal operating conditions, incubation set to 37°C: 50 W
Optional AccessoriesTHERMOstar
Microplate incubator and shaker
Atmospheric Control Unit (ACU)
Actively regulates O2and CO20.1-20%
Stacker
Magazines for up to 50 plates - continuous loading feature
Upgrades
Please contact your local representative for upgrades including options such as detection modes, reagent injectors, etc
*The NEPHELOstar Plus is for research use only.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.