Brand New. Factory Sealed. Warranty. BLOW OUT PRICE! Fast Free Shipping. \"\"MADE IN GERMANY\"\"EL6021 | EtherCAT Terminal, 1-channel communication interface, serial, RS422/RS485
The EL6021 serial interface enables the connection of devices with RS422 or RS485 interface. These devices communicate with the automation device via the coupler. The active communication channel operates independently of the higher-level bus system in full or half duplex mode at up to 115.2 kbaud. The transmission of differential signals according to RS422 guarantees high immunity to interference through electrically isolated signals.
In conjunction with the TwinCAT Virtual Serial COM Driver (see TwinCAT Supplements – Communication) the EL6021 can be used as a normal Windows COM interface.
- Technical data
- Housing data
To topTechnical dataEL6021Connection technologyterminal contactData transfer channelsTxD and RxD, full/half duplexData transfer rates2400…115,200 baud; default: 9600 baud, 8 data bits, no parity and one stop bitInterfaces1 x RS422/RS485Bit transferwith differential signalCable impedance120 ΩCable lengthapprox. 1000 m twisted pairProviding external supply–Power supplyvia the E-busDistributed clocks–Electrical isolation500 V (E-bus/signal voltage)Data buffer864 bytes receive buffer, 128 bytes transmit bufferConfigurationno address setting, configuration via PLCCurrent consumption power contacts–Current consumption E-bustyp. 170 mAWeightapprox. 55 gOperating temperature-25…+60°CStorage temperature-40…+85°CRelative humidity95%, no condensationVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Protect. rating/installation pos.IP20/variablePluggable wiring levelfor all ESxxxx terminalsApprovals/markingsCE, CCC, UL, ATEX, IECEx, DNV, cFMusEx markingATEX:
II 3 G Ex ec IIC T4 Gc
IECEx:
Ex ec IIC T4 Gc
cFMus:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec IIC T4 Gc
- Technical data
- Housing data
To topHousing dataEL-12-8pinES-12-8pinDesign formcompact terminal housing with signal LEDsterminal housing with pluggable wiring 35 mm DIN rail, conforming to EN 60715 with lockSide by side mounting by means ofdouble slot and key connectionMarkinglabeling of the BZxxxx seriesWiringsolid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriverConnection cross-sections*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²s*: 0.08…1.5 mm²,
st*: 0.08…1.5 mm²,
f*: 0.14…1.5 mm²Connection cross-section AWGs*: AWG28…14,
st*: AWG28…14,
f*: AWG26…16s*: AWG28…16,
st*: AWG28…16,
f*: AWG26…16Stripping length8…9 mm9…10 mmCurrent load power contactsImax: 10 ADimensions (W x H x D)12 mm x 100 mm x 68 mm
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.