Automotive Electric Brake Fluid Bleeder Automatic Brake Oil Exchange Machine Kit
ANCEL BR1000 Brake Fluid Bleeder Kit Features:
【Significant Advantages】- Compared to traditional compression brake bleeder kit, ANCEL BR1000 Brake Oil Drain Kit can effectively expel 99% of the air bubbles through intermittent flow and thoroughly remove impurities in pipes and used brake fluid in ABS pump, thus optimizing or eliminating the manual empelling process, ensuring the quality of brake fluid and extending the brake pump life.
【Covered Car Models】 - Ancel BR1000 automotive brake bleeder fluid change machine fits for BENZ, BMW, AUDI, Volkswagen, SKODA, Volvo, Land Rover, Jaguar, Porsche, Buick, Chevrolet,Ford, Citroen, Peugeot, Chery, Changan,Mazda, Haima, BYD, Roewe, Renault, Geely, Zhonghua, Great Wall, MG, BESTURN, GAC, QOROS, ETC.
【Automatic Operation】- ANCEL brake bleeder kit one person is very simple to use, after setting up the working environment, just one click operation to achieve automatically break fluid change. You can complete the break fluid changing by yourself without any other complex operation.
【Adjustable Pressure】- Additionally, the brake pressure bleeder kit is equipped with an adjustable pressure button, it enables you to customize the pressure level based on the specific requirements of the vehicle. By increasing the pressure, you can accelerate the speed of the operation, which makes it possible to cater to various demands in diverse situations.
【High Pressure and Low Fluid Shutdown Protection】- ANCEL BR1000 brake pressure bleeder is built in pressure monitoring device, pump will be disconnected to prevent air injecting into the brake oil container if no pressure formed or pump sucks air, which will perfectly ensure the quality of brake fluid.
【Dual Switch And Dual Pump】- Avoiding damage to the vehicle brake fluid pot due to the high pressure start-up of the equipment caused by the pressure regulating knob not returning to zero, and at the same time, the stable and constant pressure of the double-pump work, avoiding the vehicle brake fluid pots and sub-pumps to be subjected to additional impacts.
【Corrosion Resistant Material】- ANCEL BR1000 brake pressure bleeder internal and external piping and components are made of corrosion-resistant materials. After years of market verification and response, the quality is very stable.
Warm Note: Each time use the equipment, you need to empty the air in the pipeline, you need to lock the drain screw in the state of brake fluid flow to avoid the suction hose sucked the bottom of the new liquid pot, resulting in the inability to suck in the brake fluid. Brake fluid is corrosive, to keep the equipment and the vehicle paint surface clean.
Why Do We Need to Change Car Brake Fluid?
After being used for a period of time, automotive brake fluid will have a lower boiling point, pollution and oxidative deterioration, which will affect the brake performance and cause safety hazards. Also, the brake fluid reservoir has a vent, which causes the brake fluid to draw in moisture from the air and turn into air bubbles at high temperatures. When air bubbles appear in the brake fluid pipeline, there will be a loss of braking power or brake failure. Therefore, it is necessary to check the quality performance of the brake fluid according to the operating environment, seasonal changes and working condition, and to exchange it on time. Generally, brake fluid should be exchanged after two years of use or 50,000 km.
Why Choose ANCEL BR1000 Automotive Brake Fluid Bleeder Change Machine?
1. Dual Switch Design:to avoid damage to the vehicle brake fluid pot due to high pressure startup of the equipment caused by the pressure regulating knob not returning to zero after the last work.
2. Dual Pump Design:dual pumps work at the same time to form a stable constant pressure, to avoid the pulse of a single motor to generate air into the tube, and pressure regulation is more stable, to avoid additional impact on the vehicle brake fluid jugs and the sub-pumps.
3. Low Fluid Shutdown Protection Function:new fluid pot brake fluid consumption, the device will automatically shut down, to avoid inhaling air into the brake system.
High Pressure Protection Design: the product is set to limit the working pressure (0.3MPa) to avoid misuse of the pressure caused by the surge and the potential safety hazards.
4. Patent Design:for the oil change process of unstable pressure regulator designed a more stable and convenient way to regulate the pressure, and has a utility model patent.
5. Corrosion Resistant:internal and external pipelines and components are made of corrosion-resistant materials, after years of market verification and response, the quality is very stable.
6. Portable Design:highly integrated modular design, can be placed in different workstations and tool carts, the use of flexible scenarios.
Self-Sealing Quick Plug: avoid brake oil outflow from the quick connector when the equipment is idle.
Large-capacity Oil Pot: add a full amount of oil at one time, to avoid adding oil frequently. Imported Japanese recycling pots, strong and durable.
Significant Advantages
Compared to traditional compression brake bleeder kit, ANCEL BR1000 Brake Oil Drain Kit can effectively expel 99% of the air bubbles through intermittent flow and thoroughly remove impurities in pipes and used brake fluid in ABS pump, thus optimizing or eliminating the manual empelling process, ensuring the quality of brake fluid and extending the brake pump life.
Easy-To-Use Brake Fluid Change Machine
1. Add the new brake fluid into the new brake fluid bottle.
2. Connect the input hose and pressure-balanced hose to the brake fluid bottle.
3. Connect the power source.
4. Connect the output hose to the car brake fluid reservoir through the adapter.
5. Connect the fluid recycling bottles to the vehicle brake fluid four sub- cylinders.
6. One button starts, and then observe and wait until the brake fluid exchange is completed.
Warm Tips:Each time you use the equipment, you need to empty the air in the pipeline first, you need to lock the drain screw in the state of brake fluid flow to avoid the suction tube sucking the bottom of the new liquid pot, resulting in the inability to inhale the brake fluid Brake fluid is corrosive, to keep the equipment and the vehicle paint surface clean.
Significant Advantages Over Traditional Manual Brake Fluid Change Tools
High-pressure Shutdown Protection
ANCEL BR1000 brake bleeder change machine is set to limit the working pressure (0.3MPa) to avoid misuse of the pressure caused by the upsurge of the potential safety hazards.Dual Switch Design
To avoid damage to the vehicle brake fluid pot due to the high pressure startup of the device because the regulator knob was not reset to zero after the last job.Dual Pump Design
Dual pumps work at the same time to form a stable constant pressure, avoiding the pulse of a single motor to generate air into the tube, and more stable pressure regulation, avoiding additional impact on the vehicle brake fluid jugs and the sub-pumps.Low Fluid Shutdown Protection Function:
When the brake fluid in the new fluid pot is consumed, the equipment will automatically shut down to avoid inhaling air into the brake system.Corrosion Resistant
Internal and external piping and components are made of corrosion-resistant materials to extend the service life to meet customers\' long-term needs.Large Capacity Oil Bottle
Add enough oil at once to avoid frequent oil additions, use recycled pots imported from Japan, sturdy and durable.
Packaging Details
Working VoltageAC220V/AC110VGross Power95WWorking Pressure0.15~0.3 MpaLimit Pressure of Protection0.4MpaWorking Temperature-10~+60℃Storage temperature-20~+65℃Length of effluent line3mReturn line (green)0.6mSuction line(red)0.6mPower cord3mWaste liquid solution box1L*2New liquid filling box2.5L*1
Packing List:
1*ANCEL BR1000 Main Engine
1*Filling Line
1*Suction & Return Line
1*Standard Joints
2*Waste Liquid Solution Box
PaymentDelivery detailsTerms of salesAbout usContact usPayment
1.We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect.
2.Please contact us if you need to use another method to pay.
3.Payment should be made within 7 days after offerding ends.
4.Otherwise we will be cancle your order.
5.We are not responsible for buyers’ local taxes.
6.Please include your special requests in note if there is any.
Delivery details
1. Shipping terms: UPS or USPS carriers provide transportation services, including economical transportation and standard transportation!
2.All of the items will be shipped to buyer\'s address,please confirm your address on before you buy.Please make sure it is correct and include phone number for delivery.
3.Your order will be usually shipped out the same or next business days once the payment is made and cleared, except on weekends and holidays.Please include your special requests in note if there is any.
4.Most of products are checked and tested carefully before shipment.Well Packed protects your items with suitable material so as to avoid damage during transit.
If your product is damaged upon arrival, please contact us immediately to resolve it. Please do not open a case or return at will. Please believe that we will properly solve your problem.
5. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
If your package delayed few days, due to any unexpected factor, please wait patiently. your kind understanding would be highly appreciated!
Terms of sales
1.We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory
If you are unsure whether your vehicle is compatible, you can contact us and we will respond within 12 hours.
Please provide specific information about your vehicle model (manufacturer, year, model, or VIN), as well as the features you need. Thank you!
2.We are authorize distributor, our all items are 100% original and Our devices have warranty,12 months free repair for the devices.
Please contact us firstly when you need warranty service.
If your product is damaged upon arrival, please contact us immediately to resolve it. Please do not open a case or return at will. Please believe that we will properly solve your problem.We will instruct you on how to return and get refund or replacement.
If you choose to return the product directly without contacting us, please choose the reason for the return: doesn\'t fit or doesn\'t like it . Thank you! Please don\'t worry about the return fee, we will bear the return shipping cost for this reason, that is, you can choose this reason to return the product for free! No additional payment required! 100% free return!
About us
1.We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years.
2.We have more than 100 employees devoting to customer satisfaction.
3.We are eager to be your professional parner of automobile diagnostic tool.
4.Welcome to consult us by mail if you have any difficulty in software installation.
Contact us
1. We are committed to providing customers with the best products and services,Please do not hesitate to leave us your positive response if you are satisfaction with our products ,delivery or services .
2. If you have Any Questions, Please do not hesitate to Contact Us by email/ message. We will reply you within 12 hours and do our best solve the problem with you (Except on Weekends and Holidays) .
3.Work time:GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .
On Nov 8, 2026 at 12:48:05 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.