DigitalEGT Thermometer 12-24VDC,Pyrometer, Temperature controller with EGT Probe
The item has supper mini size (1x2x3\" or 24 x 48x75mm) forusing on the car panel and Exhaust Gas Temperature (EGT)monitoring.It can be powered directly by the car battery 12-24 VDC. It shows current temperature and also you can set your alarm temperature or set point too. The device willturn on a red outputLED in the frontpanel to getdriver\'sattention if the temperature is above your set point and also you can setanother over alarm for alarm output . So, It has 2 relay switch, onerelayoutput and also one over alarm relay output that each output switch separately can beusedto turn on a buzzer, shut off the fuel,orturn on acooling fan. The meter will accept all EGT K type sensors on the marketand display the temperature on Fahrenheit or Celsius. The max temperature range for this device with Ktype EGT probe is 2372 F (1300 C)
This sale includes an EGT K type thermocouple probe. The probehas 2” long. Cable length(2 meters) with Maximum working temperature: 1832F (1000C) .
Control Method
PIN control (including ON/OFF, step-type PID and continuous PID)
Self-tuning control
Detective Temperature Range
32 to 2372 F or 0 to 1300 °C (with K type)
Display
Red, 4 Digit, C or F degree ,Process value (PV), Setting value (SV)
Output, alarm and self-tuning can be indicated by: LED
Input Signal
Thermocouple: K,E,S,B,J,T,R,WRe3/25, RTD, Pt100, Cu50
Accuracy
±0.2%F.S and display resolution is 0.1 C or 0.1 F degree
Control Way
PID with over and under temperature alarm output
Output mode
8VDC, 30mA (short circuit) for driving SSR module
Also Equipped with a built-in relay (3Amp).
Out1= switchable between buit-in Relay or external SSR
Alarm output
High limit alarm, lower limit alarm,
Proportional Band
0.1-99.9%
Integration time
2-1999 S
Derivative time
1-399 S
Working Power
9-30VDC
Out Dimension
1x2x3\" or 24x48x75 mm compact size
Operation Ambient
0-50C , <RH85%
EGT Probe Specifications:
- Measurement range: 32 -1800 °F(0 - 1000 °C)
- Thermocouple Type: K Type
- Cable length : 6 ft
- Sensing tip length:1.9\" (48mm)
- Sensing tip diameter: 0.19\" (5mm)
- Thread width : M8
- Internal Insulation: Fiber Glass
- External shielding: Metal Shield (Stainless steel braided)
********** We offer a wide range of Controllers. You name your inquiry, we produce it for you. ********** For more information or ordering larger volumes please contact us.\"Thanks for taking time and observing this ad\"
shipping to Australia, New Zealand and Asia takes longer than other countries (17-25 Business days)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.