Automatic Straight & Curved Edge Bander Woodworking Edge Trimming Polishing Machine
Product Overview The automatic edge banding machine is highly automatic and highly efficient woodworking machinery, is mainly used for sticking the edge band to the straight and curved edges of boards automatically, continuously and firmly, integrates the functions of automatic plate feeding, straight and curved edge banding, double-sided gluing, automatic band cutting, automatic end-to-end alignment, top and bottom trimming, double-sided polishing and adhesive mark removal, and achieves intelligent edge banding operation. It is an ideal choice for the woodworking industry and the plate processing industry. Voltage 110V Edge speed 0-6m/min Power of edge banding machine 1200W Power of edge cutting machine 800W Edge thickness 0.8-1.5mm Edge height 10-40mm Heating time 5-15min Adhesive volume 600ml Trimming method Double-sided trimming Adhesion method Double-sided adhesive coating Control mode Intelligent temperature control Disconnection mode Automatic band breaking Packing dimension 57.09*25.20*33.46 inches (145*64*85cm) Net weight / Gross weight 229.2LB (104kg) / 315.2LB (143kg) Attention
1. Ensure that there are sufficient appropriate adhesives in the adhesive pot.
2. Be sure to conduct trial edge banding before normal production.
3. Please immediately press the emergency stop switch if there is material jamming, abnormal noise, smoking or odor.
4. Do not put hands into the machine during operation.
5. Use special tools to remove the stuck materials.
6. Regularly clean the residual adhesives, dust and other things with special tools.
7. Start edge banding only after the temperature reaches the set temperature.
8. When the machine is heating, do not put your hand into the edge strip groove to avoid burns.
9. During use, do not set the moving speed of the edge banding machine too fast or too slow. It should be controlled within an appropriate range.
Operation Panel
The independent operation panel is adopted to achieve effective control over the temperature, the edge banding speed and the feeding speed, one-button start and digital control operation are designed to achieve trimming and polishing, and operation is independent, easy and efficient.
Press Wheels
Double rows of press wheels are integrated on the high-strength press beam and matched with a guide rail chain conveyor, ensuring the plate conveying parallelism, preventing the plate from deviation in the feeding process, facilitating smooth edge banding and trimming, and improving the edge banding effect.
Handwheel
The handwheel is matched with the clear scales to accurately adjust the height of the press beam, well adapting to different plates of different specifications and effectively improving the practicability and adaptability. The scales can clearly show the height, facilitating real-time monitoring.
Height Limiter
The height limiter can effectively limit the height of the edge band in the feeding process, ensuring the edge band is parallel to the board, preventing the edge band from deviation and improving the edge banding precision.
Polishing Structure
The polishing wheel can run at a high speed to conduct efficient polishing on the top and bottom, making the edge banding strip smooth and free of burrs and avoiding accidental injuries.
Foot Switch
The foot switch is designed for effectively controlling the edge banding operation, can liberate double hands of the operator, meets the ergonomic standards, reduces the labor intensity and is easy to use and low in maintenance cost.
Adhesive Adjusting Mechanism
The two knobs are designed for adjusting the adhesive amount appropriately to adapt to different edge banding requirements, effectively reducing the adhesive overflow and waste and improving the edge banding quality.
Extension Plates
Two extension plates are additionally designed on the two sides of the machine, lengthening the operation platform, facilitating feeding and discharging of boards and stably supporting the boards during operation.
Dust Bag
The built-in vacuum cleaner is designed for effectively sucking and collecting the removed adhesives and other things, and well keeping the working environment clean and safe.
Operation Method 1. Place the machine in a flat and firm ground.
2. Connect the machine to the 110V power supply, and pay attention to connecting the ground wire.
3. Add the appropriate amount of hot melt glue to the glue pot.
4. Place the edge banding strip and adjust the height limit columns.
5. Adjust and lock the fitting wheel as needed.
6. Set the temperature through the temperature controller, adjust the motor speeds through the motor speed regulators, and start the motors after the temperature reaches the set temperature.
7. Press the foot switch, turn on the start switches, place the board on the chain conveyor belt or the supporting plate, and push the board to be subjected to the straight/curved edge banding, trimming and polishing operation.
You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
On Jun 25, 2026 at 00:14:16 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.