Automatic Quantitative Numerical Control Liquid Filling Machine 5 ml 220V LT130
$299.00

Instruction manual
1. Install the stents according to the above picture.
2. Function
1) Filling time: set the pump working time and control the filling area.
2) Waiting time is the time span between the first and second filling, which is only used when the filler is set to car.
3) counter indicates how often it has been filled.
4) Filling speed adjust the filling speed.
5) Setting Press this button when the fountain pen is turned on, then the fountain pen is filled, fill your bottles to the desired volume and press this button again so that the fountain pen retains the filling area, the filling range is fixed.
6) Manual switch to manual model, and press the button fixed point. This will be filled as long as you press the button.
7) Automatic change to car model.
3. Process
Press the red on/off button, place the bottle under the filling nozzle, press [setting] to start the filling process, fill the bottle to the desired volume, press the button again [setting] The model [auto] or [manual] to start working.
4. Attentions
The pump for the filler is a diaphragm pump that is a vulnerable part. The pump should be changed when the filling flow becomes very slow. Contact us to buy a new pump.
Technical parameters:
Model LT-130.
Drive Type Electric
Filling mode can be switched automatically or manually.
Shell material: mirror stainless steel.
Power: 50 W.
Single pump max. Flow rate: 3.2 lmin.
Filling range: 5 ml ~ 3500 ml.
Repeat error 0.5%.
Machine size: 280 x 250 x 160 mm.
Weight of the machine: 5 kg

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.