Automatic Flat Surface Labeling Machine, Fixed-point Labeling Machine110V 4-10cm

新建网页 8

Desktop Automatic Top and Side Labelling Machine Plane and Fixed-point Labelling Machine 110V

1. Conveyor Belt Guardrail

14. Round Bottle Labelling Cylinder

2. Conveyor Belt

15. Round Bottle Positioning Auxiliary Wheel Vertical Adjustment Handle

3. Conveyor Belt Guardrail Bracket

16. Labelling Auxiliary Wheel

4. Bottle Detection Sensor

17. Round Bottle Labelling Motor

5. Bottle Detection Optic Fiber Sensor

18. Round Bottle Photoelectric Detector

6. Brush

19. Labelling Driving Wheel Height Adjustment Handle

7. Touch Screen

20. Label Head Height Adjustment Handle

8. Start Switch

21. Round Bottle Label Feeding Motor

9. Emergency Stop Switch

22. Label Reel

10. Power Switch

23. Label Pulling Device

11. Speed Regulator

24. Plane Label Head Left-Right Adjustment Handle

12. Speed Regulator

25. Waste Label Rewinding Device

13. Round Bottle Positioning Auxiliary Wheel Adjustment Handle

　

The automatic labelling machine is designed for labelling the tops and sides of various products, such as canned food, red wine bottles and beverage bottles. It integrates the functions of automatic conveying, precise positioning and fixed-point labelling, and has a compact structure and high adaptability. The automatic labelling machine can be combined with different packaging devices to form automatic assembly lines and is suitable for the industries of food, daily chemical, electronics, etc.

Note

There is no air compressor in the packing list. Customers should use their own air compressors.

Parameters

Voltage

110V 60Hz

Material

The surface is stainless steel.

Conveyor belt width

4.72in (12cm)

Conveyor belt length

70.86in (180cm)

Inner diameter of label roll

2.99in (7.6cm)

Outer diameter of label roll

9.8in (25cm)

Label output direction

Left output

Output speed

20-200 PCS/min

(Depending on the bottle size and label length)

Suitable bottle diameter

1.57-3.9 inches (4-10cm)

Label height

0.59-5.9in (1.5-15cm)

Label length

0.98-11.8in (2.5-30cm)

Precision

±0.039in (1mm)

Packing dimension

75.00*32.68*43.31 inches (190.5*83*110cm)

Net weight / Gross weight

435.4LB (197.5kg)/569.9LB (258.5kg)

Precaution

1. Place the machine on the flat ground, and keep it away from electromagnetic interference and heat source.

2. Ensure the power supply conforms to the nameplate of the machine, and reliable grounding is achieved.

3. Correctly install the label roll to avoid label folds and damage.

4. Do not touch the running parts during operation. Do not put hands or tools into the machine during operation.

5. Do not touch the photoelectric detection eye with your hands during machine operation to prevent the machine from mis-sensing and mislabeling.

6. When the machine has problems, press the emergency stop button directly to suspend all work.

7. After turning off the power switch, there is still voltage in some circuits in the electrical control system of the machine. When servicing the control circuit, be sure to unplug the power cord.

Operation Method

1. Connect the power supply.

2. Install the labels.

3. Adjust the height of labeling assembly.

4. Adjust the tightness of the labeling positioning device.

5. Connect the air source.

6. Set the touch screen parameters.

7. Start the conveyor belt.

8. Test labeling

9. Check the labeling situation.

　

Features

Touch Screen

The LCD touch screen allows independent setting of the plane labelling and fixed-point labelling modes, can display the running state of the machine in real time, is easy to operate and control and has high anti-interference performance.

Speed Regulators

The double speed regulators are designed for controlling the speeds of conveyor belt and label feeding mechanism correspondingly, adopt the knob design to improve the operation convenience, and substantially enhance the labelling precision.

Label Feeding Mechanism

The label feeding mechanism adopts the modular design, can feed different labels stably and smoothly, effectively avoids tensile deformation and deviation of labels and improves the labelling consistency and reliability.

Label Detection Electric Eye

The high-precision electric eye is adopted to detect the labels accurately and quickly, and is stable, durable and adjustable as needed, greatly improving the product level, reducing the label loss and enhancing the labelling efficiency.

Adjusting Handwheels

The adjusting handwheels are combined to form a multi-dimensional adjustment structure, allowing the parts to quickly adapt to round bottles with different specifications, and making adjustment easier and more precise.

Air Treatment Assembly

The air treatment assembly is safe and reliable, compact in structure and easy to adjust, achieving air purification and pressure adjustment, well meeting different labelling requirements and ensuring stable and reliable operation.

Conveyor Belt

The chain plate type conveyor belt can stably convey different bottles or products at different speeds, making each product enter the labelling station precisely. It is resistant to corrosion and aging and is not prone to deviation and deformation.

Driving Motor

The high-performance driving motor is durable, reliable and low in noise, can achieve stable torque output and high load capacity, meets the continuous operation requirements of batch production and is easy to maintain and low in fault rate.

Item Included (160679)

Desktop Automatic Top and Side Labelling Machine

新建网页 3

Shipping & Handling Details

Default Shipping Cost or Free Shipping Information:

▲Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Warranty & response

▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.

On Jun 2, 2026 at 23:17:24 PDT, seller added the following information: