OVERVIEW
Autocall A49AV-APPLW-O (Simplex 49AV-APPLW-O) TrueAlert ES addressable weatherproof wall-mount horn/strobe appliance, supplied with the matching A49WPBB-AVVOWR red weatherproof surface-mount back box. Autocall and Simplex are both Johnson Controls brands and these parts are functionally identical across the two labels.
A/V means audible plus visible: this appliance combines an electronic horn with a selectable multi-candela strobe. It is NOT a speaker appliance and does not connect to an audio NAC. Both horn and strobe are individually addressed and controlled over the IDNAC signaling line circuit.
COVER NOT INCLUDED: this set contains the appliance and the required weatherproof back box only. A weatherproof cover is a separate part and is NOT included. A complete listed outdoor installation requires that cover, which must be sourced separately. No mounting screws or hardware pack are included either.
TESTED & WORKING STATUS
Not tested. Surplus installer stock that has not been bench powered, addressed, or commissioned. No functional claim is made about the horn, the strobe, IDNAC communication, or DIP addressing. Verification was limited to reading the printed factory PID labels on both cartons and the I.D. labels on the appliance chassis and back box, and to visual Addressable audible/visible (A/V) horn strobe notification appliance, wall mount
Environment: Outdoor and wet location, NEMA 3R when installed with the weatherproof back box and a weatherproof coverProtocol: Simplex IDNAC signaling line circuit for power, addressing, supervision, and controlOperating voltage: 23 to 31 VDC, special applicationMaximum DC operating current: 80 mA at 15 cd, 165 mA at WP 75 cd, 238 mA at 75 cd, 274 mA at WP 185 cdMinimum horn output: high 81.3 dB steady and 76.4 dB coded; low 73.8 dB steady and 69.9 dB codedDiagnostics: Self-Test and Magnet Test supported when the IDNAC SLC is in diagnostic modeAppliance part number: 07431086AC, chassis date code 22 027Appliance installation instructions: 579-1032AC Rev K; label 0623-1287AC Rev CListings: UL Listed 8M23 fire alarm audible and visual appliance for the hearing impaired, FM ApprovedBack box: A49WPBB-AVVOWR, part number 07431269AC, date code 22 066, installation instructions 0579-858AC Rev C, UL Listed 87M7Back box dimensions: 5-1/2 in. H x 6-1/8 in. W x 1-5/8 in. D, with pre-installed perimeter gasket and multiple conduit knockoutsCountry of manufacture: MexicoCONDITION
Both cartons have been opened for inspection. The appliance is out of its poly bag and is clean throughout: the clear lens housing and reflector are free of cracks, chips, and clouding, the white body is unmarked, and the terminal block and board are free of corrosion and flux residue. The back box is clean with its factory perimeter gasket intact, seated, and undistorted, and all knockouts unpunched. No mounting-screw witness marks, no field wiring residue, no dust accumulation, and no paint or drywall overspray on either component. Carton exteriors show light shelf and handling wear. No mounting hardware or screw pack is present with either fire alarm control units providing IDNAC signaling line circuits, including the 4100ES family
Autocall control units using the equivalent IDNAC architectureCross-references directly to Simplex 49AV-APPLW-O; back box to 49WPBB-AVVOWRThe 49WPBB-AVVOWR is the manufacturer-required weatherproof box for this appliance and is included hereA weatherproof cover is REQUIRED to complete the installation and is ordered separately; it is not includedMounting plates are NOT used with weatherproof appliances, so none is neededNot compatible with conventional NAC circuits or non-IDNAC addressable protocolsAppliance carton marked ISOLATOR 2 COMPATIBLECAUTION per the manufacturer: do not paint or otherwise alter the factory finish on covers or back boxesWHAT'S INCLUDED
- 1x A49AV-APPLW-O weatherproof horn strobe appliance
- 1x A49WPBB-AVVOWR weatherproof surface back box, red, with factory gasket
- Printed installation instruction sheet and appliance compatibility chart
- Both original cartons
- NO weatherproof cover, NO mounting screws or hardware pack, and no conduit fittings are included
INSTALLATION & LIABILITY
This device is part of a life-safety system and must be installed, programmed, and commissioned by a licensed fire alarm professional in accordance with NFPA 72 and all applicable local codes. Nothing in this listing is certified working; no bench power-up has been performed, and a bench power-up would not constitute commissioning in any case. Some new items in this inventory have been opened for inspection and identification. Buyers must verify part number, revision, firmware, and panel compatibility against their own system before purchase, and must note that no weatherproof cover and no mounting hardware are included. No manufacturer warranty transfers with this sale.
Shipping Policy
We ship within 3 business day of payment. All items are carefully packed.
Returns
30-day returns accepted. Item must be in original condition.
Contact
Message us with any questions before purchasing.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.