Auto Conveyor Table Capping Machine Cap Rubbing Pressing Integration Machine

Auto Conveyor Table Capping Machine Cap Rubbing Pressing Integration Machine

The automatic desktop conveyor table capping machine is a professional cap rubbing and pressing integration machine for capping different bottle shapes in the industries of food, daily chemical, cosmetics and so on. It has the advantages of attractive appearance, high capping speed, sensitive operation and high qualification rate. The operator only needs to put the bottle cap on the bottle mouth. The bottle cap is automatically tightened by the cap rubbing wheel during the bottle moving forward. The machine can be combined with the labelling machine, filling machine and conveyor to form production lines, and can also be independently used.

Note that the air pressure should reach 0.6MPa to work normally. Please ensure the air pressure of the air pump when the machine is working.

(Note:We only sell the machine, do not match the air compressor, and customers need to use their own air compressors.)

Product parameter

Conveyor belt speed 0~7m/min Production speed 10-30 bottles/min Screw cap torque 3-8N.m Bottle height 50-190mm (1.97\'\'-7.48\'\') Bottle diameter 20-100mm (0.79\'\'-3.94\'\')Cap diameter20-60mm(0.79\"-2.36\") Power supply 110V/50-60Hz Total power 500WMachine size130x55x100cm (51.18\'\'x21.65\'\'x39.37\'\')Net weight75.5kg (166.45LBs)

Product analysis

1. Touch screen

2. Power switch

3. Start switch

4. Emergency stop switch

5. Speed regulation knob

6. Cap rubbing machine photoelectric sensor

7. Conveying chain plate

8. Guardrail

9. Cap press head

10. Height adjusting handwheel　　

11. Cap screwing motor

12. Cap screwing size adjusting cylinder

13. Bottle separation photoelectric sensor

14. Guardrail support

15. Bottle separation cylinder

16. Rubbing wheel

17. Cap press cylinder

18. Cap press head

19. Cap press detection photoelectric sensor

20. Bottle holding cylinder

Feature

Touch Screen

The intelligent touch screen clearly displays different parameters, allowing the operator to freely adjust and monitor various parameters as required and improving the operation convenience.　　

Driving Motor

The high-quality copper motor is adopted to drive the machine to run smoothly, has stable performance, long service life, low maintenance cost and noise and high adaptability.

　

　

Speed Regulator

The operator can easily adjust the conveying speed of the conveyor belt as needed through the speed knob, and the equipment safety and personal safety can be well guaranteed.

　

Height Adjusting Handwheel

The height adjusting handwheel can be used to adjust the press height of the capping machine according to the bottle height, and height adjustment is easy, convenient and quick.

　　

Bottle Separation Sensor

The bottle separation sensor can sense the bottle and give a separation instruction to the baffle to block the remaining bottles until capping of the first bottle is completed, and the response is quick.

　

　

Pressure Gauge

The pressure gauge can clearly display the air pressure in real time, facilitating real-time monitoring and early warning. The air inlet is connected with the air compressor and has simple operation and stable performance.

　

Chain Plate Conveyor Belt

The chain plate conveyor belt can convey various bottles smoothly and stably, effectively saving time and labor, and achieving high conveying efficiency and low cost. The guardrails on the two sides are adjustable.

　　

Fiber Optic Amplifiers

The fiber optic amplifiers are designed for adjusting the sensitivity of the sensor electric eyes according to the actual situation, and coarse adjustment and fine adjustment of the sensitivity can be conducted as needed.

　

　

Tool Box

The tool box is provided for storing tools and auxiliaries of the machine and protecting them from damage and loss, is convenient to carry and use, and effectively improves the practicability.　 1. This machine has an intelligent touchable operation screen, which is more convenient and efficient.

2. One touch operation, convenient and simple.

3. The bottles stacked on the conveyor belt can be separated one by one, without artificial deliberate placement, saving time and manpower.

4. Chain plate conveyor belt. It can automatically transport products, saving time and labor.

5. Imported motor, lasting and durable, strong power.

6. The rotating bottle height is adjustable, and the application range is wider.

Attention

To ensure safe production, please read the following precautions carefully:

1. Use the power supply and air source that conform to the requirements of this machine. The stability of the air source must be maintained under continuous working conditions.

2. After the power switch is turned off, there is still voltage in some circuits in the electrical control of this machine. When repairing the control circuit, please be sure to unplug the power cord.

3. Do not put your hands on the capping wheel and the capping head when working, and pay attention to personal safety.

4.When there is a problem with the machine, press the emergency stop button directly to suspend all work.

Operation Method

Capping process: bottle entry → bottle separation → capping → bottle discharge

A. Place the bottles on the conveyor belt.

B. Bottle separation cylinder obstructs and releases the bottles.

C. The capping motor is working.

D. After capping, the bottles are transported to the rear of the conveyor belt.

Item Number: 1 x Automatic Desktop Conveyor Table Capping Machine 110V (160654)

Shipping & Handling Details

Default Shipping Cost or Free Shipping Information:

▲Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Warranty & response

▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.

On Jan 18, 2026 at 19:26:27 PST, seller added the following information:

On Jan 30, 2026 at 00:02:32 PST, seller added the following information: