AudioControl Matrix Plus 6-channel line driver
Line Driver: To achieve the best possible signal to noise ratio and dynamic range from your amplifiers, a line driver can increase the head unit\'s output voltage up to 24 dB (maximum is 9.5 volts RMS/13 volts peak). The Matrix Plus has three sets of inputs and three sets of outputs.
Output Level: The output levels are adjustable (-12 dB to as much as +24 dB) to match unit\'s line voltage to the top of your amp\'s input range; the max output is 9.5 volts RMS/13 volts peak. Each of the three sets of outputs has an individual control.
Output Voltage Indicators: Each set of outputs has four LEDs to indicate the output voltage; 1 volt, 2 volts, 5 volts, and Maximized (9.5 volts).
Balanced Inputs: Using the balanced differential input circuit cancels noise picked up in the transmission line between the Matrix Plus and the source unit. The three sets of inputs can be individually set to balanced or unbalanced if needed.
Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.
Input Linking: The rear and subwoofer sections can be linked (independently) to the front inputs, useful if the source unit has only one or two pair of line outputs.
Subsonic Filter: The installed subsonic filter chip on the subwoofer output is 18 dB/octave at 33 Hz.
Terminal Block: The power/ground/remote terminal is a removable Phoenix style plug; the wiring (up to 12-gauge) is attached to the block, then the block is plugged into the chassis of the Matrix Plus.
Optional Wired Remote: An optional wired remote is available (ACR-1 sold separately) to adjust the subwoofer output level. (The ACR-1 actually controls the output level of the sub channels and any other channels linked to the sub using the input link jumpers.)
Specifications:
- Maximum Input Level: 9.5 volts RMS/13 volts peak
- Maximum Output Level: 9.5 volts RMS/13.5 volts peak
- Frequency response: 10 Hz-100 kHz; +/-1dB
- THD: 0.005%
- S/N Ratio: 110dB
- Input Impedance: 20 kΩ
- Output Impedance: 50 Ω
- Output Gain: -12 dB to 24dB
- Subsonic Filter: 33 Hz, 18 dB/oct
- Power Supply: Transformer isolated PWM DC/DC converter
- Current Draw: 250 mA
- Recommended Fuse: 1 amp
Product info:
- 6-channel line driver
- provides up to 24 dB of gain (9.5 volt RMS maximum)
- top-mounted controls for easy adjustment
- three sets of RCA balanced inputs and outputs eliminate noise (switchable to unbalanced mode)
- lights indicate 1-, 2-, or 5-volt output, plus Maximized indicator
- conformal-coated board protects against the elements and vibrations
- subsonic filter on sub output: 33 Hz, 18 dB/oct
- optional wired remote level control available (ACR-1 sold separately)
- recommended fuse rating: 1 amp
More Info:
- frequency response: 10-100,000 Hz
- signal-to-noise ratio: 110 dB at full output
- dimensions: 7-1/8\"W (including cables) x 1-5/16\"H x 7-1/8\"D
Serial Numbers Are Recorded and Photographed Per Each Customer Order. Any product returned for any reason Must be returned in its original and serial number matching box / packaging.
Return for Refund
- All returns must be new, unused and/ or unopened in original serial number matching packaging including screws, hardware, knobs, plastic coverings, protective films, serial numbers, tags, stickers, and other manufacturer labels not removed or tampered with etc. A 20% restocking fee may be deducted from return refunds. Returned merchandise that is either opened, used or missing items will be issued up to a 50% partial refund.
- The retail box cannot be used as a shipping box.
- Serial numbers must match serial numbers shipped along with matching serial number packaging, merchandise is photographed with serial number per purchase and recorded for our records, items returned back to us that were not purchased from us will not be refunded or warrantied.
- A traceable and insured shipping method is strongly recommended, we are not responsible for merchandise that has not reached our facility.
- If you do not see something you expect to be included in the description we provide, it will not be included.
- Speakers, Tweeters, and Subwoofers with burnt/ frozen coils are not warrantied
- Amplifiers that are returned and deemed defective from improper installation or use are not warrantied
- Shipping & handling charges are non-refundable. All refunds will be computed based on the unit cost. Products purchased with “Free Shipping” will have the UPS or USPS Rate deducted from their refund.
Most Orders processed, packaged and shipped within 1 Business Day , Tracking Information provided at time of shipping and is available to view after our daily carrier pickup is scanned and uploaded into carriers system. For expedited shipping quotes, or if looking for a quantity not listed please feel free to contact us.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.