Product highlights
mono subwoofer amplifier300 watts RMS x 1 at 4 ohms500 watts RMS x 1 at 2 ohms750 watts RMS x 1 at 1 ohmbridgeable with a second EPIC750 to produce 1500 watts RMS x 1 at 2 ohmsClass D amp technologyfrequency response: 10-190 Hzvariable low-pass filter (40-180 Hz, 12 dB/octave)variable subsonic filter (Off-50 Hz, 12 dB/octave)EPICBoost™ Variable Frequency Bass Boost (0-12 dB at 30-80 Hz)ACR-E wired remote control includedpower harness for accessory preamp includedcompatible with AudioControl line output converters and Epicenter bass enhancerspre-installed 1A fuse included for accessory power connectionpreamp inputs onlywiring, fuse, and hardware not included with amplifier:
- 4-gauge power and ground leads and an 80A fuse recommended
- dimensions: 8.62\"W x 2.01\"H x 6.1\"D
- warranty: 1 year
What\'s in the box
- Mono subwoofer amplifier (installed 1A mini fuse for Link output)
- ACR-E Remote level control
- 16\' Remote level control cable (RJ-12 connectors on both ends)
- 39\" Epicenter link cable (4-pin connector on one end/ 3-pin Epicenter power & ground connector on other end)
- Four 5/8\" screws
- Four 3/8\" screws
- 2 Allen keys (3mm & 2.5mm)
- Spare 1A mini fuse
- Quickstart guide
About this item
Written by Crutchfield\'s Buck Pomerantz
Compact, power-packed, and affordable
AudioControl\'s EPIC750 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 750 watts and make your sub sing out loud and clear with minimal stress to your car\'s electrical system. All this power is packed into a rugged, compact amp that\'ll fit in a lot of different spaces in a lot of different vehicles.
Bass system power, control, and tuning
Lovers of loud bass can strap two EPIC750s together to create a 1500-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you\'ll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you\'re not using an aftermarket radio with RCA outputs.
Made for THE EPICENTER®
For ultimate bass sound and connectivity, the EPIC750 includes a power and ground connection harness that\'ll work with AudioControl\'s EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp\'s input.
EPIC750 input and control panel
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.