AudioControl EPIC 4000 Monoblock 1 Channel 4000 Watt RMS Subwoofer Car Amplifier

EPIC Series Monoblock 4000 Watt RMS AmplifierHigh-Power, Competition-Grade Class D: Experience high performance and thermal efficiency that delivers monster power to the most demanding subwoofer systems.

• High-Current Design – 1Ω Stable: Provides massive, stable power output necessary to drive the most demanding low-impedance speaker loads at 4000W RMS @ 1 ohm.

• Smart Auto-Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier should encounter an issue.

• 12 dB/octave Linkwitz-Riley Variable Low Pass & Subsonic Filters: Fine-tune your audio setup, matching your subwoofer’s frequency range for ground-shaking bass performance while protecting your subwoofers in vented enclosures.

• EPIC Boost Variable Frequency Bass Boost: Hear your bass slam with a variable frequency (30 to 80 Hz) bass equalizer with a boost range of 0 dB to +12 dB.

• Solid Power/Speaker Terminals with Hex Screws: Secures maximum current flow and signal integrity, ensuring low-resistance connections for consistent performance.

•ACR-E Remote Level Control Included:Adjust your sound effortlessly with the included remote gain knob, giving you full control at your fingertips.

⚡INSTALL REQUIREMENTS

•Two 0-gauge power wires and two 0-gauge ground wires are required for thisamplifier to function. This amp is living the high-current lifestyle!
• Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches
of its connection to the battery. This amp likes its fuse like it likes its bass: close and reliable.
• Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power
and ground connections. Keep your power clean and your bass mean!
• Do NOT mount the amplifier to subwoofer enclosures. These two like their personal space.

🔊SPECIFICATIONS

Amplifier Topology Class D
Power Output RMS (14.4V, <1% THD 1000 Watts @ 4 ohms
2000 Watts @ 2 ohms
4000 Watts @ 1 ohm
Frequency Response (+/- 1 dB) 10 Hz - 190 Hz
S/N Ratio 104.8 dBa, Ref 1000 Watts @ 4 ohms
Power / Ground Wire Gauge 0 AWG
Speaker Terminal Wire Gauge 8 AWG
Recommended Fuse Rating 200 Amp x 2 / 400 Amps x 1
Low Pass Filter 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost 30 to 80 Hz, Gain: 0 to 12 dB
Line-level Inputs 0.5 to 12 VRMS
Chassis Dimensions (LxWxH) 21 in x 6.1 in x 2.04 in
533 mm × 155 mm × 52 mm