Apollo 55000-600APO XP95 Optical Smoke Detector
Apollo 55000-600APO — XP95 analogue addressable optical smoke detector using forward light scatter.
Optical detection responds to the larger particles thrown off by slow-burning and smouldering fires, where an ionisation detector would respond late. An infrared emitter fires a burst once per second at an obtuse angle to a silicon PIN photo-diode; smoke entering the chamber scatters photons onto it in proportion to density.
- Supply voltage 17 V to 28 V dc, two-wire and polarity insensitive
- Quiescent current 340 µA; power-up surge 1 mA for 1 second; alarm LED 4 mA
- Nominal response threshold 0.12 dB/m to EN 54-7
- 25 counts in clean air, tolerance 7; a count of 55 is the EN 54 alarm level
- Operating temperature -20 °C to +60 °C; 0% to 95% RH, no condensation
- 100 mm diameter × 42 mm height, 105 g; white polycarbonate
XP95, Discovery and CoreProtocol compatible; compliance for this part is CPR and LPCB. 55000-620 is the same detector with wider approvals, 55000-660 is black, and 55000-640APO is the intrinsically safe version. The XP95 ionisation detector shares this case and differs only by its LED.
Brand new in original packaging. Ships same business day from Atlanta, GA when ordered by 3 PM ET. 30-day returns. 1-year warranty.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.