Anderic Wired Wall Switch 3-Speed Ceiling Fan Remote Control Kit | UC9051T-WIRED/UC7067FMRXThe Anderic UC9051T wired wall controller and UC7067FMRX receiver kit converts a pull-string 3-speed or 4-speed AC ceiling fan to wall-controlled 3-speed operation. Specifications Radio frequency (RF) Good to Know Only for AC ceiling fans with lights. For fans without a remote kit, or with the same style of canopy receiver. The wall controller is hard-wired. Follow the installation instructions included with the kit; for wiring questions, use a licensed electrician. Setup / Pairing Step 1: Install the UC7067FMRX receiver WARNING: High voltage. Turn off power to the fan by removing the fuse or switching off the circuit breaker. Remove the fan canopy from the mounting bracket. Disconnect the existing wiring between the fan and the supply at the junction box. If you are replacing a receiver, disconnect all of its wires. Lay the black antenna wire on top of the receiver and put the receiver in the mounting bracket. Connect with the supplied wire nuts: green fan wire to bare supply wire; black receiver wire (AC IN L) to black supply wire; white receiver wire (AC IN N) to white supply wire; white receiver wire (TO MOTOR N) to white fan wire; black receiver wire (TO MOTOR L) to black fan wire; blue receiver wire (FOR LIGHT) to blue light wire. Push all connected wires up into the junction box and reinstall the canopy. Before closing up, note the dip switch pattern on the UC7067FMRX receiver. Step 2: Install and match the UC9051T wired wall control Make sure the fan and wall switch are powered OFF at the fuse box. Wire the wall control (AC 120V) as shown in the guide: black wire with yellow tag to AC supply (black wire from receiver); black wire with blue tag to AC supply (black wire to receiver input); green to ground. Before attaching the face plate, find the dip switches on the left side of the wall control and set them to EXACTLY match the receiver\'s dip switch pattern. Attach the face plate. The OFF/ON switch powers the wall control; it will not operate when switched off. The remote only works when its 4 dip switches are set to exactly the same up/down pattern as the receiver\'s switches. What\'s in the Box 1 remote and 1 receiver Works with AC ceiling fans with lights, 3-speed or 4-speed pull-string. Anderic Wired Wall Switch 3-Speed Ceiling Fan Remote Control Kit | UC9051T-WIRED/UC7067FMRX
The Anderic UC9051T wired wall controller and UC7067FMRX receiver kit converts a pull-string 3-speed or 4-speed AC ceiling fan to wall-controlled 3-speed frequency (RF)Good to Know
- Only for AC ceiling fans with lights.
- For fans without a remote kit, or with the same style of canopy receiver.
- The wall controller is hard-wired.
- Follow the installation instructions included with the kit; for wiring questions, use a licensed electrician.
Setup / Pairing
Step 1: Install the UC7067FMRX receiver
- WARNING: High voltage. Turn off power to the fan by removing the fuse or switching off the circuit breaker.
- Remove the fan canopy from the mounting bracket.
- Disconnect the existing wiring between the fan and the supply at the junction box. If you are replacing a receiver, disconnect all of its wires.
- Lay the black antenna wire on top of the receiver and put the receiver in the mounting bracket.
- Connect with the supplied wire nuts: green fan wire to bare supply wire; black receiver wire (AC IN L) to black supply wire; white receiver wire (AC IN N) to white supply wire; white receiver wire (TO MOTOR N) to white fan wire; black receiver wire (TO MOTOR L) to black fan wire; blue receiver wire (FOR LIGHT) to blue light wire.
- Push all connected wires up into the junction box and reinstall the canopy.
- Before closing up, note the dip switch pattern on the UC7067FMRX receiver.
Step 2: Install and match the UC9051T wired wall control
- Make sure the fan and wall switch are powered OFF at the fuse box.
- Wire the wall control (AC 120V) as shown in the guide: black wire with yellow tag to AC supply (black wire from receiver); black wire with blue tag to AC supply (black wire to receiver input); green to ground.
- Before attaching the face plate, find the dip switches on the left side of the wall control and set them to EXACTLY match the receiver\'s dip switch pattern.
- Attach the face plate. The OFF/ON switch powers the wall control; it will not operate when switched off.
The remote only works when its 4 dip switches are set to exactly the same up/down pattern as the receiver\'s switches.
What\'s in the Box
Works with AC ceiling fans with lights, 3-speed or 4-speed pull-string.
× × × × × × ×
Buy now and save! Shipping info
Click the Shipping & Payments tab above the listing description for more info
Price: $7.95 (local shipping)
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Additional Information
No additional information at this time
Ask seller a question
You might also like Anderic Substitute for Overhead Door OUK 3-Door Wireless Keypad Wall Console wit Anderic Substitute for Genie GUK-R Keypad Compatible with LiftMaster Chamberlain Anderic GUK-R Keypad Compatible with LiftMaster Chamberlain Genie Craftsman and LG MR26GA Magic Remote Control with AI, Voice, and shortcuts | RF - AKB30086802 Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Anderic
Shipping & Payments
Shipping is a flat rate across US at a rate of $7.95
Payment
Accepted Payment Methods
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
integration by
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.