Anderic 3-speed Universal Ceiling Fan Remote Control Kit with Wall Switch Remote, Handheld Remote, and Receiver | UC9051T-Wired, FAN28R, RR7078TRThis Anderic kit adds a wired wall control, a handheld remote, and a receiver to most 3-speed AC ceiling fans. It is sold as the UC9051T-Wired, UC7067FMRX, and RR7079T kit.Specifications Wall control: Anderic UC9051T Wired (CHQ9051T) Handheld remote: Anderic RR7079T Receiver: Anderic UC7067FMRX Wireless: Radio Frequency (handheld); wired wall control pairs by dip switches Batteries: 1 A23 / 23A for the handheld remote (not included) Fan control: 3 speeds plus off; light on/off and dimming Good to Know Turn off power at the breaker or fuse box before installing the wall control or the receiver. Household electrical power can cause serious injury or death. A qualified electrician is recommended. The wall control’s OFF/ON switch must be on for the wall control to operate. Reverse works only if the fan supports reverse. The look may differ from the photos. Compare the part numbers before ordering. Setup / PairingInstall the receiver (power must be off): Disconnect power to the fan at the fuse or circuit breaker. Remove the canopy and disconnect the existing wiring. If you are replacing a receiver, disconnect all of its wires. Place the receiver in the mounting bracket with the antenna laid on top of the receiver. Connect the wires with the included wire nuts: green fan wire to the bare supply ground; black receiver AC IN L to the black supply wire; white receiver AC IN N to the white supply wire; white receiver TO MOTOR N to the white fan wire; black receiver TO MOTOR L to the black fan wire; blue receiver FOR LIGHT to the blue light wire. Push the wires into the junction box, reinstall the canopy, and keep power off until the wall control is wired. Install and pair the UC9051T wired wall control (power must be off): With power still off, connect the wall control as labeled: black wire with a yellow tag to the AC supply (back/return wire from the receiver); black wire with a blue tag to the AC supply (black wire to the receiver input); green to ground. Before you attach the face plate, set the dip switches on the side of the wall control to match the dip switches on the receiver. Install the face plate, insert 1 A23 battery in the handheld remote, set the handheld remote’s dip switches to the same pattern, then restore power and test both controls. What\'s in the Box 1 Anderic UC9051T wired wall switch remote 1 white wall plate 1 Anderic UC7067FMRX receiver 1 Anderic RR7079T handheld remote 1 wall mount bracket Wire nuts and screws Battery not included Compatible Models Anderic UC9051T-Wired / CHQ9051T, UC7067FMRX, and RR7079T kit Most 3-speed AC ceiling fans that can use a UC7067FMRX or FAN28R-style receiver. Before ordering, compare the photos and the model or part number on your current remote or device. If you are not sure, contact us with your model or a photo of the original. Anderic 3-speed Universal Ceiling Fan Remote Control Kit with Wall Switch Remote, Handheld Remote, and Receiver | UC9051T-Wired, FAN28R, RR7078TR
This Anderic kit adds a wired wall control, a handheld remote, and a receiver to most 3-speed AC ceiling fans. It is sold as the UC9051T-Wired, UC7067FMRX, and RR7079T kit.
Specifications
- Wall control: Anderic UC9051T Wired (CHQ9051T)
- Handheld remote: Anderic RR7079T
- Receiver: Anderic UC7067FMRX
- Wireless: Radio Frequency (handheld); wired wall control pairs by dip switches
- Batteries: 1 A23 / 23A for the handheld remote (not included)
- Fan control: 3 speeds plus off; light on/off and dimming
Good to Know
- Turn off power at the breaker or fuse box before installing the wall control or the receiver. Household electrical power can cause serious injury or death. A qualified electrician is recommended.
- The wall control’s OFF/ON switch must be on for the wall control to operate.
- Reverse works only if the fan supports reverse.
- The look may differ from the photos. Compare the part numbers before ordering.
Setup / Pairing
Install the receiver (power must be off):
- Disconnect power to the fan at the fuse or circuit breaker.
- Remove the canopy and disconnect the existing wiring. If you are replacing a receiver, disconnect all of its wires.
- Place the receiver in the mounting bracket with the antenna laid on top of the receiver.
- Connect the wires with the included wire nuts: green fan wire to the bare supply ground; black receiver AC IN L to the black supply wire; white receiver AC IN N to the white supply wire; white receiver TO MOTOR N to the white fan wire; black receiver TO MOTOR L to the black fan wire; blue receiver FOR LIGHT to the blue light wire.
- Push the wires into the junction box, reinstall the canopy, and keep power off until the wall control is wired.
Install and pair the UC9051T wired wall control (power must be off):
- With power still off, connect the wall control as labeled: black wire with a yellow tag to the AC supply (back/return wire from the receiver); black wire with a blue tag to the AC supply (black wire to the receiver input); green to ground.
- Before you attach the face plate, set the dip switches on the side of the wall control to match the dip switches on the receiver.
- Install the face plate, insert 1 A23 battery in the handheld remote, set the handheld remote’s dip switches to the same pattern, then restore power and test both controls.
What\'s in the Box
- 1 Anderic UC9051T wired wall switch remote
- 1 white wall plate
- 1 Anderic UC7067FMRX receiver
- 1 Anderic RR7079T handheld remote
- 1 wall mount bracket
- Wire nuts and screws
- Battery not included
Compatible Models
- Anderic UC9051T-Wired / CHQ9051T, UC7067FMRX, and RR7079T kit
- Most 3-speed AC ceiling fans that can use a UC7067FMRX or FAN28R-style receiver.
Before ordering, compare the photos and the model or part number on your current remote or device. If you are not sure, contact us with your model or a photo of the original.
× × × × ×
Buy now and save! Shipping info
Click the Shipping & Payments tab above the listing description for more info
Price: $7.95 (local shipping)
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Additional Information
No additional information at this time
Ask seller a question
You might also like Anderic Substitute for Overhead Door OUK 3-Door Wireless Keypad Wall Console wit Anderic Substitute for Genie GUK-R Keypad Compatible with LiftMaster Chamberlain Anderic GUK-R Keypad Compatible with LiftMaster Chamberlain Genie Craftsman and LG MR26GA Magic Remote Control with AI, Voice, and shortcuts | RF - AKB30086802 Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Anderic
Shipping & Payments
Shipping is a flat rate across US at a rate of $7.95
Payment
Accepted Payment Methods
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
integration by
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.