Anderic Substitute for Sharp RRMCGA444WJSA Projector Remote Control [RR3720]

Anderic Substitute for Sharp RRMCGA444WJSA Projector Remote Control [RR3720]The Anderic RR3720 is a substitute for the Sharp RRMCGA444WJSA remote. It is a universal projector remote with code library and learning. It works with Sharp projectors such as DT500, XVZ3000 and XVZ3000U. Specifications Shipped remote: Anderic RR3720 Infrared (IR); point it at the device Batteries: 2 AAA (not included) Good to Know Not pre-programmed: needs a 4-digit code, code search or learning Key layout and labels differ from the original remote; use the learning function to add any model-specific keys IR only: line of sight to the projector is required Setup / Pairing Turn on the projector. Press and hold Mute and the Down key for about 3 seconds until the indicator light stays on, then release. Enter the 4-digit code for your projector brand from the code list; the light goes off if the code is valid. Check that most keys work; if not, repeat with another code for the brand, or hold Power during code search until the projector responds. Troubleshooting If the indicator blinks three times after you enter a code, the code was not accepted; enter it again or try another code for your brand. If no key is pressed for 30 seconds, the remote leaves programming mode; start again. When learning, hold the two remotes 1 to 2 inches apart with the IR ends pointing at each other. Three flashes mean the key was not learned; start that key again. To clear learned keys, hold Mute and OFF for about 3 seconds until the light flashes twice. To reset, hold Mute and Reset the same way. What\'s in the Box 1 Anderic RR3720 universal projector remote Batteries not included Compatible Models Sharp RRMCGA444WJSA Supplied with: DT500, XVZ3000, XVZ3000U Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list. Anderic Substitute for Sharp RRMCGA444WJSA Projector Remote Control [RR3720]

The Anderic RR3720 is a substitute for the Sharp RRMCGA444WJSA remote. It is a universal projector remote with code library and learning. It works with Sharp projectors such as DT500, XVZ3000 and remote: Anderic RR3720

Infrared (IR); point it at the device

Batteries: 2 AAA (not included)

Good to Know

• Not pre-programmed: needs a 4-digit code, code search or learning
• Key layout and labels differ from the original remote; use the learning function to add any model-specific keys
• IR only: line of sight to the projector is required

Setup / Pairing

1. Turn on the projector.
2. Press and hold Mute and the Down key for about 3 seconds until the indicator light stays on, then release.
3. Enter the 4-digit code for your projector brand from the code list; the light goes off if the code is valid.
4. Check that most keys work; if not, repeat with another code for the brand, or hold Power during code search until the projector the indicator blinks three times after you enter a code, the code was not accepted; enter it again or try another code for your brand.
5. If no key is pressed for 30 seconds, the remote leaves programming mode; start again.
6. When learning, hold the two remotes 1 to 2 inches apart with the IR ends pointing at each other. Three flashes mean the key was not learned; start that key again.
7. To clear learned keys, hold Mute and OFF for about 3 seconds until the light flashes twice. To reset, hold Mute and Reset the same way.
What\'s in the Box
• 1 Anderic RR3720 universal projector remote
• Batteries not included
Compatible Models
• Sharp RRMCGA444WJSA
• Supplied with: DT500, XVZ3000, XVZ3000U

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.

× × × × × × × ×
Buy now and save! Shipping info

Click the Shipping & Payments tab above the listing description for more info

Price: $7.95 (local shipping)

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.

Thank you for shopping with us on !

Additional Information

No additional information at this time

Ask seller a question

You might also like Anderic Substitute for Overhead Door OUK 3-Door Wireless Keypad Wall Console wit Anderic Substitute for Genie GUK-R Keypad Compatible with LiftMaster Chamberlain Anderic GUK-R Keypad Compatible with LiftMaster Chamberlain Genie Craftsman and LG MR26GA Magic Remote Control with AI, Voice, and shortcuts | RF - AKB30086802 Contact

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Anderic

Shipping & Payments

Shipping is a flat rate across US at a rate of $7.95

Payment

Accepted Payment Methods

Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.

Thank you for shopping with us on !

Returns

Returns are accepted

Items must be returned within 30 days of the sale ending

Buyer will pay for return shipping.

integration by