Pay attention:
Please do not clicking the "return" before contacting us.
We are professional,responsible, when you encounter a problem we always to help.
We always reply messages .
And commit you 100% satisfaction guarantee.
Fitment For:
Mercedes-Benz GL320 2007 - 2009 All Trim Levels N/A
Mercedes-Benz GL350 2010 - 2012 All Trim Levels N/A
Mercedes-Benz GL450 2007 - 2012 All Trim Levels N/A
Mercedes-Benz GL550 2008 - 2012 All Trim Levels N/A
Mercedes-Benz ML320 2007 - 2009 All Trim Levels N/A
Mercedes-Benz ML350 2006 - 2011 All Trim Levels N/A
Mercedes-Benz ML500 2006 - 2007 All Trim Levels N/A
Mercedes-Benz ML550 2008 - 2011 All Trim Levels N/A
Mercedes-Benz R320 2007 - 2009 All Trim Levels N/A
Mercedes-Benz R350 2006 - 2013 All Trim Levels N/A
Mercedes-Benz R500 2006 - 2007 All Trim Levels N/A
Package Included:
1x Radiator
(as shown in the picture)
Specification:
Radiators are essential in keeping your engine cool and removing excess heat that accumulates when the engine burns fuel. A failing radiator can lead to engine and transmission failure caused by overheating. Our radiators are 100% leak tested to prevent coolant loss and keep your engine running efficiently.
Professional Installation is Highly Recommended.
Installation:
Direct Replacement. Perfect fitment. No modification required.
Product does not come with installation instructions, please refer to a shop/factory manual for installation.
Features:
-Ensure exact fit, form and function for an easy drop-in installation;
-Built with high density multi-lowered fins for maximum cooling efficiency;
-Improve Cooling Efficiency;
-100% Leak Tested;
-Plastic tanks with aluminum core;
-Built to strict quality control standards;
This Aluminum Core Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its lightweight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently.Radiators are essential in keeping your engine cool and removing excess heat that accumulates when the engine burns fuel. A failing radiator can lead to engine and transmission failure caused by overheating. Our radiators are 100% leak tested to prevent coolant loss and keep your engine running efficiently.
How to clean radiator:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
How to replace the radiator:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)
Note:
1. Project operation, the vehicle normal temperature 60 to 80 degrees.
2. Add detergent if the tank is too full can take some antifreeze.