Product highlights
6-channel car amplifier75 watts RMS x 4 + 150 watts RMS x 2 at 4 ohms100 watts RMS x 4 + 250 watts RMS x 2 at 2 ohms200 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 bridged at 4 ohmsClass D amp technologyCh 1/2: selectable variable high-pass filter (50-400 Hz or 400-6000 Hz, 12 dB/octave)Ch 3/4: variable high-pass or bandpass filter (50-400 Hz and 400-6000 Hz, 12 dB/octave)Ch 5/6: variable low-pass filter (50-400 Hz, 12 dB/octave)GTO™ (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level inputpreamp and speaker-level inputsspeaker-level inputs require RCA adapter cablesoptional wired remote level controller availablefuse rating: 30A x 34-gauge power and ground leads recommended — wiring and hardware not included with amplifierdimensions: 14\"W x 2-1/16\"H x 10-3/4\"Dwarranty: 1 yearWhat\'s in the box
- Three 30-amp ATO fuses (installed)
- 4 Mounting feet
- Four 3/4\" Screws
- Eight M2.5x5.5mm Machine screws
- 2mm Allen wrench
- 3mm Allen wrench
- Owner\'s manual (English/ French/ Spanish)
- Alpine Verification Certificate
- Warranty information
- Power supply note
- On-line product registration information
About this item
Written by Crutchfield\'s Buck Pomerantz
For loud and realistic-sounding music
Into high-resmusic? Alpine\'s R-Series R-A90S amplifier reproduces high-frequency soundsup to 45,000 Hz, so you can enjoy the clean sound and enhanced realism you want in your music. Alpine applied some hot technology from their top-of-the-line X-Series amplifiers into this R-Series amp, including the use of high-efficiency transformers and premium custom capacitors in the amp\'s construction. Dual "Sierra" response circuitry decreases distortion by correcting the output using the original input signal. Even if you\'re playing CDs and standard-resolution music files, you can count on superior sound quality from this amplifier.
It\'s not just about power
Alpine designed this amp to run a 3-way active system. Channel 1/2can send a couple tweeters up to 75 watts RMS each and features a high-frequency high-pass filter necessary for safe tweeter operation. Channel 3/4can send a pair of midrange drivers 75 watts RMS each and features a band-pass filter that keeps extreme highs and lows away from the midrange speakers. Channel 5/6 is for subwoofers, low-pass filter only, and can power two subs with up to 250 watts RMS each, or one sub with 500 watts.
For maximum overdrive
You could also use this amplifier to power two high-performance speakers with 200 watts each plus a sub with 500 watts for optimum power applications. In these cases you\'d switch the crossovers from 3-way to 2-way operation. Whatever configuration you decide on, don\'t forget to include the optional RUX-KNOB.2remote bass knob to control your bass from the dash.
Alpine R-A90S control panel
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.