All New Rack Ears - for Recess OR Flush Mounting Mackie DL16S Digital Mixer
$38.50

All New Rack Ears!!These rack ears fit the Mackie DL16S mixer. Now you can mount the mixer either flush, or with a 3\"+ recess! The recess mount option allows your internal audio cables to remain connected, even when you close the cover. This allows cables to remain plugged in with minimal interference from the rack cover when closed.In either mounting situation, all the ventilation holes are still fully open - none are blocked.Pass through holes allow cables to easily pass from the rear of the rack to the front of the mixer.The brackets are strong! 3D printed, andnow no loner made from PLA+, but made from PETG material, which is equivalent or better in strength than ABS material. After all, it\'s what plastic milk cartons are made from, and they are very thin walled, yet resilient to damage. What\'s more, PETG has a higher glass transition temperature than PLA+, making these less susceptible to high storage temperatures and \"wilting\" in the rack.It is made with a 100% infill - making these parts solid plastic. Extra thick, with all right angle interior corners reinforced by design. Note the stacks of quarters in the pictures, showing the thickness in millimeters of the two mounting surfaces.I also learned there are rack cases out there that are a bit narrower than the standard opening. This issue has been completely solved. These ears mounted on the mixer yield an overall width of the mixer at 18-7/8\", which is well within the 19\" \"standard\" rack opening. And, the mounting holes remain at 18-5/16\" per the standard.Finally, as you know, these parts are made out of plastic, whereas the OEM parts are made from steel. Because of this, we highly recommend mounting the mixer so that there is something supporting it from underneath, whether it’s the bottom of your rack, or simply another piece of equipment that provides support to the underside of the mixer, such as a power conditioner or a splitter. The more the mixer is supported, the less likelihood you’ll encounter any issues.The reason is because if the mixer is NOT supported from underneath AND the equipment rack is exposed to temperatures greater than about 120 Degree F for a prolonged period of time, for example in a cargo trailer exposed to the sun all day, it is possible that the plastic in the ears will soften slightly and mixer will droop down toward the rear, and this will deform the rack ears.Should your rack ears ever droop, the good news is there\'s a simple fix:
1) Remove the rack ears and place them in a warm (100 Degrees F) oven for about 10 minutes but, watch them carefully. They will return to their normal shape. Remove them and let them cool, then
2) Re-mount the mixer either at the bottom of the rack, or mount another piece of equipment directly underneath the mixer, so that the weight of the mixer is supported by something in addition to the rack ears. These two steps should solve the droop issue. Made in the USA by a US Veteran-owned business.
Note to International Buyers:
Unfortunately, we can no longer offer this product for sale outside of North America.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.