Airepair LCR-AR1 1.9" Transistor Tester Diode Triode FET SMD IR Signal Decoding

• Visit store
• Items for sale
• About us

Product Details

Airepair LCR-AR1Product Features
1. Compatible with SMD sockets, this device offers flexible support for various components. It allows for easy measurement of all types of surface-mount components without frequent socket changes, making testing more convenient and efficient.
2. Short-circuit test ports 1, 2, and 3, then press and hold the TEST button for 3 seconds to enter the self-calibration process. Regular calibration ensures that measurement data remains reliable at all times.
3. Supports NEC protocol infrared signal decoding, allowing you to read remote control codes and display waveforms—an essential feature for home appliance repair.
4. Switch to Auto mode, and the device automatically identifies component types. A short press of the TEST button starts the measurement, handling transistors, diodes, capacitors, inductors, and resistors with ease.
5. Press the button to manually switch to the desired measurement mode; the screen displays the corresponding icon in real time to meet specialized testing needs.
6. Suitable for product R&D, home appliance repair, educational experiments, scientific research testing, and other scenarios—a reliable tool for electronics engineers and hobbyists.Product Specifications
Model: LCR-AR1
Display: 1.9 inches
Battery Capacity: 300mAh
Charging Specifications: USB Type-C, 5V/1A
Dimensions: 62 x 90 x 32 mmProduct Description
The LCR-AR1 Transistor Tester is a high-precision, multifunctional electronic testing device designed specifically for electronic engineers, technicians, and electronics enthusiasts.
This device is designed to detect and analyze the performance and characteristics of semiconductor components such as transistors, diodes, triodes, and field-effect transistors (FETs). Equipped with a color screen, it supports multi-parameter measurement of various components, automatically identifies the type and pin configuration of the device under test, simplifies the operation process, and improves testing efficiency.Precautions
1. If a capacitor is measured without being discharged first, the device will discharge the capacitor upon insertion and locking, which may cause sparks. This feature is intended solely as a safeguard against forgetting to discharge the capacitor; for proper use, it is still recommended to manually discharge the capacitor before testing.
2. When not in use, the 123 locking interface remains in a conductive state; do not insert batteries directly.
3. If component parameters fall outside the test range, the results may indicate an incorrect component type.item list:
Transistor Tester *1
Test Socket *1
Type-C Data Cable *1
Chinese-English Manual *1
Test Clips *3LCR-TC1 Transistor TesterFeatures:
1. Portable Design: Features a 1.8-inch screen and a compact form factor. Includes a built-in battery monitoring function (0.1–4.5 V) and alerts users to recharge when the battery level drops below 3 V.
2. Self-Calibration Mechanism: To improve measurement accuracy, perform internal calibration by briefly touching the test probes together to trigger the “Please isolate probe” prompt.
3. Type-C Interface: Standard Type-C port with a built-in 300mAh battery. The indicator light turns green when fully charged; use a 5V/1A external power source for charging.
4. High-precision measurement ranges: Supports resistance measurement from 0.01 to 50 MΩ, capacitance from 25 pF to 100 μF, inductance from 0.01 mH to 20 H, Zener diode breakdown voltage from 0.01 to 4.5 V, and forward voltage drop of standard diodes from 0.01 to 30 V.
5. Multi-Function Component Identification and Measurement: Automatically detects and identifies various electronic components including NPN/PNP transistors, MOSFETs (NMOS/PMOS), IGBTs, JFETs, diodes, Zener diodes, thyristors (SCRs), resistors, capacitors, and inductors, and displays their key parameters.

Specifications:
Display: 1.8-inch LED
Battery Capacity: 300mAh
Display: TFT
Power Supply Voltage: 3.7 V
Power Source: Built-in rechargeable lithium battery
Dimensions: 70 x 90 x 26 cm
Diode Range: Less than 4.5 V
Zener Diode: Transistor detection range 0.01–4.5 V
Zener Diode Detection Range: 0.01–20 V
Thyristor Range: IGT less than 6 mA
Capacitors: 25 pF–100 μF
Resistors: 0.01–50 MΩ
Inductors: 0.01 mH–100 mH
Function Keys
Auto Power Off (Automatically shuts down after 30 seconds of inactivity)
Supports Chinese and English language switchingPrecautions
(1) After powering on, the device will automatically check the battery level and display it. When the battery voltage drops below 3.1 V, please recharge it promptly to prevent damage to the device;
(2) It is not recommended to use the device to measure battery voltage; the battery voltage must be below 4.5 V, otherwise the device may be damaged;
(3) If the parameters of the component being measured are outside the test range, the test results may indicate an incorrect component type;
(4) This product contains a lithium-ion battery. Do not expose it to fire to avoid danger; do not attempt to power on the device immediately after exposure, as this may damage internal components.
(5) During use, avoid subjecting the device to violent impacts, drops, or water exposure. If the device accidentally gets wet, allow it to dry completely before attempting to power it on; otherwise, internal components may be damaged.item list:
Tester *1
Accessory Kit *1

• Payment Method
• Shipping Policy
• Returns & Refund Method
  • Managed Payment. But we only Accept your Address, please Make sure it\'s 100% right.
  • Payment must be received in 5 business days of sale closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
  Shipping Policy

  1. We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
  2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
  3. All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund.

  Returns & Refund Policy
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
  response

  We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.