Agilent 34970A Data Acquisition Switch Unit/ 34903A 20Ch Actuator Module SetInspected in JapanShips from JapanTracked ExpressItem Condition
[Guaranteed] Arrived in working condition from a development institute or research center.
We do not perform calibration, so we cannot guarantee the accuracy and precision of the unit within the calibration period.
Please purchase this item with the understanding that it is a used item.
The case has light dirt, stains and fine scuffs on the sides and top. There is also dirt on the rubber feet, dust inside the display window, and rust on the screws of the rear Ext Trig/Alarms terminal. The handle, front/rear rubber bumpers, feet, knob and keys are all present.
The internal backup battery is depleted. The 34903A still has the previous owner\'s wiring attached. This includes a flat multicolor cable, a black wire, cable ties and tape. The wiring is soldered on, and the cable that linked it to another card has been cut.
Operation Check
- Power: turns on normally
- Display: normal
- Front panel: knob, Shift, Advanced, Close, Open keys and Utility menu respond correctly
- Self-test: full self-test PASS, no error shown
- Internal DMM: present (DMM ENABLED shown)
- Module recognition: 34903A recognized in slot 100 (REV 1.0); slots 200 and 300 show EMPTY SLOT
- Firmware: 34970A REV 13-02-02
Included Items
- 1x Agilent 34970A Data Acquisition/Switch Unit mainframe
- 1x Agilent 34903A 20-channel actuator/GP switch module, installed in slot 100
- Previous owner\'s wiring on the 34903A: CH02-CH20 CM and NO terminals wired, CH01 CM has a black wire
- No power cord, manual or cables included. The unit has a detachable power inlet; rear label reads Line: 45-440 Hz 30VA Max, Fuse: 500mAT (250V). The voltage selector window currently shows 100. Set it to match your local mains before powering on.
Please check the photos for exactly what is included.
Product Info
The Agilent 34970A is a 3-slot data acquisition/switch mainframe with a built-in 6½-digit DMM. It has GPIB and RS-232 interfaces as standard and stores up to 50,000 time-stamped readings. It is widely used for data logging, ATE and switching applications.
The included 34903A is a 20-channel general-purpose (Form C) actuator/switch module for switching external signals and loads. The 34903A does not route signals to the internal DMM. Measuring with the DMM requires a multiplexer module such as the 34901A, 34902A or 34908A, which is not Acquisition/Switch UnitCountry/Region of ManufactureUnited StatesIncluded Model 234903ANumber of Module Slots3DMM Resolution6.5 DigitInterfaceGPIB (IEEE-488), RS-232Reading Memory50,000 ReadingsLine Frequency45-440 HzPower Consumption30 VA MaxShippingDuties & TariffsReturnsAbout Us
We ship worldwide from Japan by DHL / FedEx express with a tracking number on every order.
- Orders are dispatched Monday to Friday. Weekends and Japanese public holidays are not available because the carriers are closed.
- We can only ship to the address registered on . If you need a different address, please update it on before ordering.
- Every item is professionally packed with double-wall boxes and cushioning. Sensitive equipment is packed in anti-static material.
- We do not mark merchandise values below value or mark items as gifts. Japanese, U.S. and international regulations prohibit this.
For buyers in the United States: This item is shipped with all duties prepaid (DDP). The applicable U.S. import tariff is already included in the item price — you will not be charged any additional duties or fees upon delivery.
For buyers outside the United States: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer\'s responsibility. Please check with your country\'s customs office to determine what these additional costs will be prior to offerding or buying.
Important - if a DDU shipment is returned to us: When an item ships with duties unpaid (DDU), the carrier will contact you to collect import charges and any clearance documents required. Please respond promptly. If the shipment cannot be delivered and is returned to us because import charges were left unpaid, or because the carrier\'s requests went unanswered, \'s Money Back Guarantee does not cover an order that could not be delivered for these reasons. In that case we will refund the item price once the returned item reaches us, less the actual round-trip shipping and any return or customs charges billed to us by the carrier (at cost, documented). Please make sure you are able to receive the shipment before buying.
Returns are accepted under the return policy shown at the top of this listing, and every order is covered by Money Back Guarantee.
- If anything is wrong with your order, please message us first — we answer every message and will work with you until it is resolved.
- Any damage caused in transit should be reported within 3 days of delivery, with photos of the item and the outer box.
- Returned items must include all accessories and the original packaging.
We are a Japanese company specialising in used equipment sourced within Japan. Every unit is received, inspected and photographed by our own team in Niigata before it is listed — the photos in this listing are of the actual item you will receive.
Japanese equipment is typically kept in careful condition, and we describe exactly what we find, including any faults. If you have a question about this item or are looking for something we do not currently list, please feel free to contact us.
Inspected In-House
Checked and photographed by our own technicians before listing. What we find is what we write.
Packed for Transit
Double-wall boxes, cushioning and anti-static material for sensitive equipment.
Tracked Worldwide
DHL / FedEx express from Japan with a tracking number on every single order.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.