Adafruit Feather nRF52840 Express, BLE, 64MHz, 1MB, Arduino/CircuitPython, 4062The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Paradistronic.comYour store for diy electronics
Adafruit Feather NRF52840 Express
The Adafruit Feather NRF52840 Express Bluefruit Le Board is the latest all-in-one Bluetooth Low Energy Board from Adafruit with a native Bluetooth chipset NRF52840.
Compared to older NRF52-based bluefruit modules, the NRF52840 offers double flash memory and four times SRAM. The Adafruit Feather NRF52840 can still be easily programmed with the Arduino IDE. The chipset has an integrated USB controller, so that the board manages without further chip for programming. This has a positive effect on the total price and electricity consumption.
The Adafruit Feather NRF52840 Express is the first BLE board that can be used with circuitpython. Due to the large integrated memory, it is the first BLE board that can be used with a Python interpreter. Please note that the BLE stack is currently only available for Arduino and cannot yet be used under Circuitpython.
Further extensions to the predecessor are, for example, native USB support without an additional USB controller, such as FT232, a neopixel RGB LED, 2 MB QSPI flash memory for circuitpython files and a freely programmable button.
Ideal for mobile applications! The board has a connection for 3.7 V Lipo batteries and a charging circuit. The board can be both operated and the battery loaded via the microUSB port. The Feather NRF52840 automatically changes from battery to USB operation when the board is connected via USB. The battery voltage can be measured via an analog input of the board.
Product features:
- Dimensions: 51 mm x 23 mm x 7.2 mm (without pen strips)
- Light like a (big?) Feder - 6 g
- ARM Cortex-M4F with FP hardware acceleration @ 64 MHz
- 1 MB Flash , 256 KB RAM, no EEPROM
- Bluetooth Low Energy, 2.4 GHz
- 1.7 V - 3.3 V operating voltage through internal linear voltage regulators
- USB support with UF2 bootloader
- 21 GPIO pins, including 6x 12-bit ADC, up to 12 PWM outputs
- Integrated 100 MA LIPO loader with LED charging status display
- Neopixel RGB LED on PIN 3
- Works with Allen Adafruit Featherwings, including those that use the UART interface.
Adafruits BlueFruit app for iOS and Android is suitable for quick start and ideal for prototyping.
The module is delivered entirely with USB boot loaders for use with the Arduino IDE and pen strips. The pen strips can be soldered by you if necessary.
Further information can be found on the adafruit website: to older NRF52-based bluefruit modules, the NRF52840 offers double flash memory and four times SRAM. The Adafruit Feather NRF52840 can still be easily programmed with the Arduino IDE. The chipset has an integrated USB controller, so that the board manages without further chip for programming. This has a positive effect on the total price and electricity consumption. The Adafruit Feather NRF52840 Express is the first BLE board that can be used with circuitpython. Due to the large integrated memory, it is the first BLE board that can be used with a Python interpreter. Please note that the BLE stack is currently only available for Arduino and cannot yet be used under Circuitpython. Ideal for mobile applications! The board has a connection for 3.7 V Lipo batteries and a charging circu Marke Adafruit Produktart Feather Modell Adafruit Feather nRF52840 Express Herstellungsland und -region Vereinigte Staaten Herstellernummer 4062 EAN Nicht zutreffend
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.