AUTOOL Fuel Injector Cleaner Tester Machine Ultrasonic Cleaning with Heating US
- ✅ Attention all car and motorcycle owners frustrated by reduced engine power, poor fuel efficiency, or rough idling!
- ✅ Introducing the AUTOOL CT160 Fuel Injector Cleaner Tester—your all-in-one solution to revive your engine’s performance and keep injectors in top shape.
- ✅ This professional automotive tool features powerful ultrasonic cleaning to deeply dissolve carbon deposits and grime from injectors, paired with a built-in cleaning fluid heating function that boosts cleaning effectiveness for thorough, reliable results.
- ✅ Beyond cleaning, it also offers critical diagnostic tests: uniformity detection to ensure consistent fuel distribution across injectors, atomization observation to check for proper spray patterns, fuel injection volume detection to verify accurate fuel delivery, and a tightness test to spot leaks—so you can be 100% confident your injectors are working like new.
- ✅ Whether you’re maintaining your daily driver or tuning up a motorcycle, the AUTOOL CT160 simplifies injector care and helps you avoid costly repairs down the line. Don’t let dirty injectors hold back your vehicle—grab yours today and feel the difference in engine smoothness and efficiency!
⚡Ultrasonic cleaning & Heating the Cleaning Fluid
- Ultrasonic cleaning is to use the penetrating and cavitation shock waves generated when ultrasonic waves propagate in the medium, and powerfully clean objects with complex shapes, cavities and pores to completely remove stubborn carbon deposits on the fuel injector.
- CT160 is able to heat the cleaning fluid, which can improve a lot on cleaning effect
⚡It is an expert in injector solutions, featuring 11 injector-specific functions
- 01. Ultrasonic cleaning:It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.
- 02. Idle speed test (0-20ms):Simulate the engine idling speed and test the state of the fuel injector.
- 03. Medium speed test (0-7.5ms):simulate the engine running at medium speed and test the state of the fuel injector.
- 04. High-speed test (0-4ms):Simulate the high-speed performance of the engine and test the state of the fuel injector.
- 05. Acceleration test:Simulate the acceleration state of the car and test the performance of the fuel injector.
- 06. Shift speed test:Simulate the shifting state of the car and test the working performance of the fuel injector.
- 07. Leakage test:Test the sealing condition of the fuel injector.
- 08. Idle dpeed sprayability Test:Simulate the engine idling state and test the spraying performance of the fuel injector.
- 09. Medium speed sprayability test:Simulate the engine medium-speed state and test the spraying performance of the fuel injector.
- 10. High-speed sprayability test:Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
- 11. Main unit information:used to store the product number and date of manufacture of the product.
⚡Wide Range Of Applications
- Supports most gasoline injectors on the market. The cleaner can also be used to clean diesel injectors, but cannot test diesel injectors. (Motorcycle support Honda Yamaha Suzuki Samyang only)
⚡Humanization control panel
- CT160 Injector Cleaner Tester with the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.
⚡Distinctive Shape Design
- Compact, lightweight and portable with a net weight of only 8 kg and a large 2000 ml ultrasonic cleaning tank that can clean multiple injectors simultaneously.
⚡Recovery Cleaning Fluid
- Once the injectors have been cleaned and tested, the cleaning and test fluids are recycled via a valve, saving you money and protecting the machine.
⚡Operation steps
1. Add the cleaning fluid and put the injectors into the ultrasonic cleaning bath.
2. Connect the pulse signal lines and select item 1 Ultrasonic Cleaning function to start.
1. First add the test fluid, then install the injectors on the fuel distributor, and fix them with bolts.
2. Different functions can be selected to test to see if any of the injectors are leaking or blocked.
🎯Q&AQ: How to choose test fluid? A: The test fluid assesses the fuel injector’s performance. Recommended using a professional automotive injector test fluid. If not available, medical alcohol with more than 75% alcohol content can instead. Q: How to choose cleaning fluid? A: To clean deposits (such as carbon deposits) on fuel injectors, use a cleaning fluid that is highly corrosive and flammable. For the best testing results, opt for a professional injector ultrasonic cleaning fluid. Such as brand 3M and Lucas. Q: Can l use cleaning liquid to test the injectors? A: ABSOLUTELY NOT NOT NOT! The cleaning liquid is corrosive and may damage internal machine components, corroding rubber and causing leaks. Q: Can diesel injectors be cleaned and tested by CT160 fuel injector cleaner tester? A: CT160 Heated Injection Systems Cleaners Testers can clean diesel injectors, but not test. PaymentDelivery detailsTerms of salesAbout usContact usPayment1)We accept PayPal only.2) Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!3)Please make the payment within 3 days.Delivery detailsFor delivery, Fedex,UPS/USPS, DHL EMS,Aramex,SpeedPak,China Post,DHL eCommerce,AU POST and Hongkong POST etc.Excellent Services are used as per customers' request But please be known that different shipping service means different shipping charge and shipping time! All packages will be added with a tracking number. The item will be shipped soon, Welcome your any-time order!!!Terms of sales1)Item may be returned for refund or replacement Within 30 Days Of The Purchase Date.
2)Defective products may be returned for repair up to 1~3 Year From The Purchase Date.
3)Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.International Buyers Please Note:
1)Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
2)Please check with your country customs office to determine what these additional costs will be prior to offerding / buying.
3)Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.About us1)We are a Professional Worldwide Professional Company, with own factory located in China.
2)We are reliable supplier to both wholesalers and retail sellers.
3)Itis now own stocks in the world: China ,United States ,Australia ,Germany Warehouse.
4)It is now one of the biggest online commercial corporations in China.Contact us1)Our normal business hour isMonday to Friday 9:00 AM to 6:00 PM. 2)Please email me through "MY MESSAGES" on , if you have any questions about our listings or inventory or troubles. 3)All messages be reply within 24hours.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.