AUTOOL HTS678Automotive Engine Carbon Deposits Cleaning System uses non-toxic walnut shell abrasives to remove carbon deposits from the engine’s intake manifold and valves in an environmentally friendly, safe, and efficient manner. It effectively resolves issues such as erratic idle, incomplete fuel combustion, and increased engine oil consumption. With dual 1800W modes and adjustable air pressure output, the device directs a high-pressure airflow into the engine’s intake manifold. The high-pressure, high-speed walnut shell particles tumble and collide within the enclosed intake manifold, striking the carbon deposits on the intake valves and cylinder walls. The resulting mixture of walnut shell particles and carbon deposits is then collected via a dedicated connector and directed into the abrasive collection bucket. Additionally, the unit comes equipped with 23 different adapters for various vehicle models, meeting the cleaning needs of all types of repair shops.Car De-carbon Cleaning Experts
Carbon deposits lead to engine idling instability, insufficient air intake, power down, acceleration weakness. HTS678 can help you effectively remove carbon deposits, mixing walnut sand and high-pressure gas through a high-pressure air pump and spraying it onto the surface of the parts to be cleaned, effectively breaking up and removing stubborn dirt such as carbon deposits and oil sludgeDeep Removal Of Carbon Deposits
Deeply remove the highly sticky carbon deposits onthe intake manifold, intake & exhaust valves. The high-pressure airflow and walnut sand are injected into the intake manifold of the engine, and roll and collide in the closed intake manifold, forming a closed loop of continuous injection and suction, which can quickly remove the carbon deposits in the engine intake and make the engine as new as ever , restore surging power.
Built- in Filter Cartridge and Filter Screen
AUTOOL HTS678 Walnut Sand Carbon Removal Cleaner has a built-in filter element and screen, which tumbles and impinges into the closed intake manifold to form a constant spray-in-suction-out cycle, which separates the refurbished walnut sand from the carbon deposits for recycling.
Integrated Design
The cleaning procedure of AUTOOL HTS678 Walnut Sand De-Carbon Cleaner adopts an integrated operation design. For example, when the sprayed walnut sand particles impact the carbon deposition, the walnut sand particles will be recovered inside the equipment at the same time, without manual recycling.The integrated professional design saves time and effort.External Air Source
The AUTOOL HTS678 Walnut Sand De-Carbon Cleaner is equipped with an external air source to provide a continuous external power during the cleaning work to promote the walnut sand particles to impact the carbon deposition more strongly in the pipeline and complete the carbon deposition removal work more comprehensively.Telescopic Pole
This telescopic pole is skillfully combined with universal wheels to provide great convenience for maintenance technicians, and its unique 3-speed height adjustment function can easily cope with the needs of different scenarios, whether it is in a small space or in the open field, it can be quickly adjusted to the right height to ensure the smooth operation of the work.
Adjustable Pressure
AUTOOL HTS678 Walnut Sand Decarburizing Cleaner is equipped with a pressure regulating knob, which enables flexible adjustment of the output air pressure, a feature that not only facilitates the professional technician to select the work accurately according to the work requirements, but also ensures that the most suitable working pressure is provided during the cleaning process.
Specifications
Power Supply:AC 110V±10% 60Hz
Main Power 1800W
Sand Volume 10L
Machine Weight 52KG
Environment Temperature -10°C~+40°C
Relative Moisture <85%
Product Size 490*552*780mm
Package Size 610*630*820mmPacking List
1 pcs * AUTOOL HTS678 Walnut Sand Decarburizing Cleaner Main Unit
23 pcs * Silicone Adapter
2 pcs * Sand suction hose adapter elbow5* Walnut Grit Shells (1 kg/2.2 lbs per package 11 lbs total)
1 pc * sand blasting gun
1 pcs * sand suction hose
1 pc * Goggles
1 pc * User\'s Manual
1 pc * Certificate AUTOOL HTS518 Walnut Sand De-Carbon Cleaner adopts the physical Harmless Technology of walnut sand cleaning and is specialized in efficient and non-destructive cleaning of engine carbon deposition. The walnut sand is injected into the intake manifold of the engine through the high-pressure airflow. The walnut sand under high pressure and high speed will roll and collide in the closed intake manifold, forming a closed loop of continuous injection and suction, which is fast, efficient, safe, and reliable.Dual Mode Operation Integrated Design
HTS518 Walnut Sand De-Carbon Cleaner adopts two working modes, Low Speed Mode and High Speed Mode. It is convenient to switch keys and is suitable for different cleaning requirements.Car De-carbon Gleaning Experts
Carbon deposits lead to engine idling instability, insufficient air intake, power down, acceleration weakness. HTS518 helps you clean the carbon deposits effectively, restoring your car to a healthy engine.Built-in filter
The built-in filter separates walnut grit particles from carbon deposits, and the recovered walnut grit can also be screened and regenerated for reuse, greatly reducing cleaning costs.Silicone Fitting
When the sandblasting gun impacts the carbon layer. The sandblasting hose will automatically recover the walnut sand.External Air Sourge
This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.Specialized storage box
Back design storage box, can store equipment accessories, easy to move, suitable for any occasionTelescopic rods
HTS518 has a pull rod telescopic function, 3 levels of height adjustment for easy movement, and universal wheels for easy use of maintenance technicians to move the equipmentRecommend Reason :
1 Walnut powder diameter should between 0.4-0.8mm, amount in 2-3KG(4-6.6LB)
2 Cleaning time between 1-3 minutes
3 Air pump pressure should be greater than 0.7Mpa (7bar/120PSI)Physical harmless cleaning
Walnut sand is a natural material that does not cause any corrosion or abrasion to the engine material during the cleaning process. It guarantees the cleaning effect and ensures the safety and durability of the engine.23 ADAPTERS
Compatible For BMW
Compatible For Volkswagen
Compatible For BMW B38/B48/B58
Compatible For Volkswagen Porsche 2.4/2.5/2.8/3.0;
Compatible For Volvo; Compatible For GM;
Compatible For Toyota; Compatible For Honda;
Compatible For GM; Compatible For BMW;
Compatible For Nissan; Compatible For Honda;Compatible For Land Rover; Compatible For Volkswagen Audi EA211; Compatible For Benz;
Compatible For Audi; Compatible For Volkswagen Audi 2.4/2.8;
Compatible For Benz; Compatible For BMW N26/N49;
Compatible For Audi;
Compatible For Benz 270/240;Compatible For Trumpchi; Compatible For BMW N54/N55; Packing List
1*AUTOOL HTS518 Walnut Sand De-Carbon Cleaner Main Unit
2* Hose bend
1* spray gun
1* Recycling hose
1* Spray gun nozzle
1* Goggles
23*Spray nozzle adaptation
5* Walnut Grit Shells (1 kg/2.2 lbs per package 11 lbs total)
1* User manual AUTOOL HTS558 Walnut Sand Carbon Removal Cleaner is an entry-level engine carbon cleaning device. It provides cleaning and maintenance to the engine while keeping the engine running properly at a consistently high quality.The HTS558 Engine Carbon Cleaner Walnut is uniquely designed to be easy to maneuver with its relatively small size and power, and is equipped with a high quality motor that effectively removes carbon and restores the car\'s power to a potent state. External Air SourceAUTOOL HTS558 Automotive Walnut Grit Carbon Cleaner allows the walnut grit to hit the carbon more powerfully and effectively.External Air SourceAutomotive Walnut powder engine Intake pipe valve clean machine enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.Built-In Dust FilterAutomotive Walnut Sand DE-Carbon Cleaner Machine can separate the recovered walnut sand grit from carbon deposits for recycling.Car Carbon Cleaning Experts
Carbon deposits lead to engine idling instability, insufficient air intake, power down, acceleration weakness.Deep Removal of Carbon Deposits
Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.Simple Design
The design is simple and lightweight, beautiful and compact, and practical. With universal pulley, can move 360° in all directions, convenient and labor-saving.3 Year warranty
We offer 3 years warranty for the host and 1 year warranty for the accessories, if you have any problems, you can contact us at any time, we will offer you a solution!Precautions for use:
1 The pressure of the air pump should be more than 0.7Mpa (7bar/102PSI), you need to prepare your own air compressor.
2 Walnut particle size should be between 0.4-0.8mm and the dosage should be between 2-3KG.
3 Cleaning time between 1-3 minutesPacking list
1 pc * AUTOOL HTS558 unit
1 pc * spray gun
1 Pc * Spray Gun Nozzle
1 pc. * Glasses
1 pc. * recycled hose
2pcs* Spray Gun Connector
5pcs* Spray Nozzle Adjustment
2 pcs* Walnut Grit Shells (1 kg/2.2 lbs per package 4.4 lbs total)
1pc * User manual MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.