Our products support the cleaning and testing of 99% of fuel injectors. They are especially effective for high-pressure direct injection injectors. For diesel injectors, our products support cleaning but not testing.
It is an expert in Injector solutions, featuring 15 injector-specific functions
01. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.
02. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).
03. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.
04. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.
05. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.
06. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.
07. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector.
08. Variable Speed Test: Simulate the variable Speed of the car and test the working performance of the fuel injector.
09. Leak Test: Test the sealing condition of the fuel injector.
10. Idle dpeed sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector.
11. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.
12. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
13.Pulse Injection Test : Select “13 Pulse Injection Test” Press function setting key to set pulse width and pulse times,other steps are the same as in item 02.14.Wide Pulse Injection Test: Press the up or down key to select “Item 14 Wide Pulse Injection Test”. Other steps are the same as in item 13
15.Continuous Injection Test: Press the up or down key to select “Item 15 Continuous Injection Test”. Press function setting key to set working time. (Recommended working time is less than 30s) Other steps are the same as in item 02.
LARGE CLEANING TANK
This unit is equipped with an ultrasonic cleaning tank with a capacity of 2000 ml, which enables simultaneous internal and surface cleaning of fuel injectors, ensuring a comprehensive deep cleaning of large fuel injectors.
NEW PROTECTIVE GUARD DESIGN
The goal of this design is to prevent oil injection from the injector due to imperfect sealing during the test session. It not only ensures the stability of the test environment, but also protects critical components such as the glass cylinder and control panel from potential damage, thus ensuring a safe and smooth test process.SIX-GYLINDER DESIGN
The tool is uniquely designed to clean and test up to six injectors at the same time, enhancing service efficiency. Users can easily observe the condition of the injectors and accurately assess performance. In addition, the tool is equipped with a 110 ml measuring cylinder, which is sufficient to meet the needs of the injector cleaning and testing process.PRACTICAL DRAWER DESIGN
It has a practical drawer at the bottom designed to provide a convenient space for storing various components. The interior of the drawer is also equipped with labeled compartments, and this kind of helps in the orderly organization of the components, and moreover greatly enhances the convenience and efficiency of the user in the access processCOMES WITH VARIOUS CONNECTORS
Equipped with highly flexible interchangeable composite connectors designed to accommodate a wide range of vehicle types, this unit enables it to cover a wide range of injectors for a large number of core brands of vehicles in Europe, the Americas and Asia, demonstrating versatility and a wide range of applications.SMART CONTROL PANEL
The device is equipped with a state-of-the-art color display and offers a wide range of function buttons with intelligent voltage selection, which can be adjusted according to the voltage requirements of the connected device, and best of all, a working pressure control function, which ensures that the pressure is always within the set range during the test or working process.LARGE CLEANING TANK
During the precision inspection process, the user can precisely adjust the parameters of each function, such as analog speed, pulse width, pulse count, and operating time, among other key indicators. This fine-grained control ensures that the inspection process is professional, resulting in greater accuracy and reliability every time.AUTOOL CT500 supports various fuel injector types, including high-pressure fuel injectors, direct injection injectors, and piezo injectors. It is compatible with BMW, Mercedes-Benz, Audi, Volkswagen, and other models. For more information on supported models, please contact customer service.Fir for BMW S55、 S58、G8X 、M2、 M3、 M4、 X3M、 X4MFit for Mercedes M264、M256 functionsUltrasonic cleaning:Ultrasonic cleaning can be performed on single or multiple injectors at the same time, which can remove the attachments and internal blockages on the injectors.Uniformity detection:
To detect the uniformity of the injection volume of each injector.Atomization observation:
Using the background light, you can observe the spray atomization situation of the nozzle in a comprehensive and careful manner.Tightness test:
It can detect the tightness and dripping of the fuel injector under high pressure.Fuel injection volume detection:
It can detect the fuel injection volume of the fuel injection nozzle under specific working conditions (Such as the same time and the same number of times).How to choose cleaning fluid?
Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid.
How to choose test fluid?
The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive. Its function is to simulate various working states of the fuel injector as a medium. it is recommended to use professional automotive injector test fluids. If not available locally, it is recommended to use medical alcohol with an alcohol content of more than 75% instead of the test solution.
Note:
1. Cleaning solution and test solution (industrial alcohol) should not be confused. 2. Please do not add other liquids, if you are not sure whether the liquid is correct, please contact me in advance and attach pictures
Packing List:
1*CT500 Fuel Injector Machine
1*Cleaning Fluid Drain Valve
1* Ultrasonic bath cover
1* Oil rail
6* Nozzle pads
6* Sealing Ring
5* Plugs for oil rail
1* Funnel
2* Fixing Bolt
1* Ultrasonic Cleaning Bracket
1* Pulse Signal Cable
1* Power Cable
6* Adapt Cable6* Fit for BMW special line
6* Fit for Mercedes-Benz Special Line
1* User manual with warranty card
6* 11mm adapters
6* 12mm adapters
6* 12.5mm adapters
6* 13mm adapters
6* 13.6mm adapters
6* 14mm adapters
6* 15mm adapters
6* 15.8mm adapters
6* Fit For BMW Sspecial adaptersMORE PRODUCTSMORE PRODUCTSMORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY