Refractometer-Refractive Index PAL-RI
Atago Digital Pocket Refractometer
Model PAI-RI
When the start key is pressed after placing some droplets of sample on the prism, the Refractive Index (resolution 0.0001) and temperature °C of the measurement will be displayed PAL-RI
Cat.No. 3850Scale Refractive IndexRange Refractive Index:1.3306 to 1.5284Temperature 5 to 45゚CAccuracy Refractive Index:±0.0003 (water at 20゚C)Measurement Temperature 5 to 45゚CSample Volume 2 to 3 dropsMeasurement Time About 3 secondsPower Supply 2 × AAA BatteriesInternational Protection Class IP65 Water resistantDimensions & Weight 5.5 × 3.1 × 10.9cm 100g (main unit only)Made in Japan
Really Nice Used Condition.
Turns on and works as it should.
Unfortunately, the box is in poor shape.
Comes with printed manual and Index of refraction of liquid water page
Comes with 2 new batteries
Please see the pictures as they are a part of the description PAL‑RI Pocket Digital Refractometer — Water Types & Normal ReadingsThe ATAGO PAL‑RI does not have a built‑in “card” or database that lists water types and their normal refractive index values. Instead, it is a general‑purpose refractometer that measures the refractive index (RI) of a liquid and also displays its temperature.
How it works for water:
- Zero‑setting: The manual instructs you to set the instrument to zero using distilled water before measuring other samples
- Normal reading for pure water: At 20 °C, pure water has a refractive index of about 1.3330 (±0.0003 accuracy)
- Temperature effect: RI changes with temperature — for example, at 25 °C, pure water’s RI is slightly lower (~1.3320). The PAL‑RI displays both RI and temperature, so you can compare your reading to the expected value for that temperature.
Typical “normal” RI values for common water types (approximate, at 20 °C)Water type Approx. RI
- Distilled water 1.3330
- Tap water 1.3330 (may vary slightly due to dissolved minerals)
- Seawater 1.3400 (higher due to salinity)
- Hard water 1.3330–1.3340 (slightly higher than distilled)
These values are reference points — your PAL‑RI will give the exact RI for your sample at its measured temperature.
How to check your readings
Calibrate with distilled water:
- Apply 0.3–0.5 mL distilled water to the prism.
- Press ZERO — display should show ~1.3330 at 20 °C .
- Measure your sample:
- Apply 0.3–0.5 mL of the water type you’re testing.
- Press START — note the RI and temperature.
- Compare to the expected RI for that temperature and water type.
Key points:
- The PAL‑RI does not store water type data internally — you must compare your measured RI to known reference values.
- Always match your reference RI to the measured temperature for accuracy.
- For best results, calibrate with distilled water at the same temperature as your samples.
- If you need a full reference table of RI values for various water types, you can consult the ATAGO PAL‑RI manual’s measurement section or scientific reference tables for refractive index of water at different temperatures.
- Source: Refraction for Water at Various Temperatures
- Coverage: Temperatures 0–100 °C, wavelengths 226.50, 361.05, 404.41, 589.00, 632.80 nm, and 1.01398 µm.
Example values (589 nm):
- 0 °C: 1.33432
- 20 °C: 1.33336
- 40 °C: 1.33095
- 60 °C: 1.32757
- 80 °C: 1.32342
- 100 °C: 1.31861
I take great care in packaging my items, so they arrive safely to you.
Please don’t let our shipping scare you 😀
We try to get it right, but some items are tricky until we actually package them. We do adjust accordingly after the items purchased if we need to refund you, we will.
We do combine on shipping.
Please check out my store for other great and unique items.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.