Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

ART BTDI Bluetooth Direct Box With Isolated Outputs

ART BTDI Bluetooth Direct Box With Isolated Outputs
$159.99

Buy Now

ART BT-DI: Wireless Playback Straight Into the Console

The ART BT-DI is a Bluetooth 5.0 direct box that receives audio wirelessly from a phone, tablet or laptop and delivers it on two transformer-isolated balanced XLR outputs. Bluetooth 5.0 in Class 2 form gives a line-of-sight range of up to 100 ft (30 m), and the receiver decodes both the SBC and AAC codecs that portable devices use. Combining a receiver with a real direct box matters because the usual alternative is a consumer dongle on a 1/8 in cable, which brings an unbalanced signal and a shared ground into the console with it. For a sound engineer who has fought hiss and charger buzz from a phone at the mix position, this removes both problems and the cable.

Codec Support and Real-World Range

SBC and AAC decoding cover essentially every phone, tablet and computer in circulation, since SBC is the mandatory baseline of the Bluetooth audio profile and AAC is what most handheld devices prefer. A codec is the compression scheme used to squeeze audio through the wireless link, and having the device\'s preferred one available avoids an unnecessary transcoding step that costs quality. Class 2 operation reaching 100 ft (30 m) covers a house of worship platform from the back of the room, or a fitness studio from the instructor\'s position. Presenters can stay where they are standing rather than walking to the rack to plug in.

Two Transformer-Isolated Outputs

Both XLR outputs are transformer isolated and present a 300 ohm source impedance with a maximum output level of 0 dBu. Isolation is what keeps the receiving system\'s ground separate, and it matters more than usual with portable devices because a phone on a charger is a notorious source of whine and buzz on an audio line. Two outputs deliver a proper stereo pair to two console inputs rather than forcing a summed mono compromise, and distortion stays below 0.05% typical with an unweighted signal-to-noise ratio of -90 dB. A front-of-house engineer gets the same clean, balanced pair they would expect from any other stereo source on the stage.

Monitor Output, Mono Mode and Ground Lift

A 1/4 in output switches between headphone monitoring and line level, a mono and stereo switch sets how the signal is presented, and a ground lift switch is available if hum still appears. The monitor output lets a technician confirm that the right device is connected and playing before the audio ever reaches the room, which prevents the familiar moment of the wrong playlist arriving in the PA. Mono mode is useful in a distributed install where the system itself is mono and a summed feed avoids losing content panned hard to one side. Being able to lock the main output at a fixed level suits a permanent installation where nobody should be touching a knob.

USB or Phantom Power

Power comes either from a USB supply drawing 5 V at 80 mA or from 48 V phantom power sent up the XLR cable by the mixer. Phantom power is the supply a console provides for condenser microphones, and a device that can live on it requires no outlet, no adapter and no power planning at all. That makes the BT-DI practical in a floor pocket, on a lectern shelf or at a stage position where the only cable available is the one going back to the console. A steel chassis keeps it intact when it inevitably gets stepped on.

Venues Where Wireless Playback Wins

Boardrooms, classrooms, fitness studios, worship spaces, bars and mobile event rigs all need a way for a guest device to reach the system without handing over a cable. A presenter can join from their seat, an instructor can control a playlist from the floor, and a worship team can play pre-roll from a tablet on the platform. Because the outputs are balanced and isolated, that convenience does not cost noise performance the way a consumer adapter does. One small steel box replaces a drawer full of adapters and the apology that usually accompanies them.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design