ANCEL JC200 Car Injector Cleaning Machine Dual Channel lnjector Cleaning Tool

ANCEL JC200 2-Cylinder Injector Cleaner Tester Machine for Car & Motorcycles, Pressure Adjustment Built-in Air Pump 12V Auto Motocycle Tester Tools

Fuel injector diagnose equipment is a mechatronic product that combines mechanical and microcomputer signal output technology. This product simulates various operating conditions of the engine, and inspect the fuel injectors of various motorcycles & cars

🔥 Main functions

✅ (1) Uniformity test: to check uniformity of the injections.
✅ (2) Atomization observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner.
✅ (3) Tightness test: it can detect the tightness and dropping of the fuel injector under working pressure.
✅ (4) Fuel injection volume detection: it can detect the fuel injection volume of the injector under specific working conditions.

🔥 Main features

✅ (1) Low-cost solution of injection test.

✅ (2) Use pressurized air to push test fluid, ensure stable pressure output,
achieve consistence in test conditions.

✅ (3) DC12V power supply, enhance portability of the product.

✅ (4) The oil tank liquid level is displayed visually, and the test agent can be
recycled.

✅ (5) Bright background light, you can clearly see the various situations of the
fuel injector when it is working.

✅ (6) Replaceable composite joints for different injector type.

🔥Technical specifications

Power supply: DC12V Vehicle Battery, 2Amp

Relative humidity: <85%

Environment temperature: -5oC ~ + 50oC

Tank Capacity: 150ml

Cylinder Volume: 100ml

RPM: 100~9900 step 100

Time: 30~600 Seconds

Oil Pressure: 1.2~1.5bar (Fixed)

Pressure relief: Manual

Operating Instructions

1. Button Functions:

a) -: Time adjustment / Speed adjustment.

b) +: Time adjustment / Speed adjustment.

c) MODE: Mode key, cycles through modes (Manual mode M, Automatic mode A).

d) START: Start/Stop key, short press to start when stopped, short press to stop when running.

2. Indicator Functions:

a) M: Manual mode.

b) A: Auto Mode.

3. Operation Instructions:

a) In stopped state, briefly press “MODE” to switch to M mode. Use “+/-” keys to adjust output speed (range: 100-9900 RPM). Briefly press “START” to activate operation at set speed.

b) In stopped state, briefly press “MODE” to switch to A mode. Use “+-” keys to adjust timer duration (30-600 seconds). Briefly press “START” to activate. Speed automatically adjusts within 500-6000 RPM range at +/-100 RPM increments every 0.5 seconds, stopping automatically upon countdown completion.

On Oct 23, 2026 at 19:49:08 PDT, seller added the following information: