ANCEL JC200 Automotive Fuel Injector Tester & Adapter Atomization Observation

Fuel injector diagnose equipment is a mechatronic product that combines mechanical and microcomputer signal output technology. This product simulates various operating conditions of the engine, and inspect the fuel injectors of various motorcycles & cars.

Main Features

(1) Low-cost solution of injection test.
(2) Use pressurized air to push test fluid, ensure stable pressure output,
achieve consistence in test conditions.
(3) DC12V power supply, enhance portability of the product.
(4) The oil tank liquid level is displayed visually, and the test agent can be
recycled.
(5) Bright background light, you can clearly see the various situations of the
fuel injector when it is working.
(6) Replaceable composite joints for different injector type.

Main Functions

(1) Uniformity Test: to check uniformity of the injections.
(2) Atomization Observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner.
(3) Tightness Test: it can detect the tightness and dropping of the fuel injector under working pressure.
(4) Fuel Injection Volume Detection: it can detect the fuel injection volume of the injector under specific working conditions.

Technical Specifications

Power Supply: DC12V Vehicle Battery, 2Amp
Relative Humidity: <85%
Environment Temperature: -5oC ~ + 50oC
Tank Capacity: 150ml
Cylinder Volume: 100ml
RPM: 100~9900 step 100
Time: 30~600 Seconds
Oil Pressure: 1.2~1.5bar (Fixed)
Pressure Relief: Manual

2-Cylinder Design
This tool can clean and test two fuel injectors simultaneously, providing efficient service. It allows for easy observation and accurate evaluation of the injectors\' condition through comparison.

ANCEL JC200 Adjustable Testing Mode
One-click testing with flexible modes for faster, more accurate diagnostics.

⭐Manual Test (M Mode)
The M indicator lights up.
Switch to M mode, set speed (100–9900 RPM) via +/- buttons, then press start to run at your desired RPM.

⭐Automatic Test (A Mode)
The A indicator lights up.
Switch to A mode, set timer (30–600s) via +/- buttons, then press start. Speed automatically adjusts from 500–6000 RPM (±100 RPM every 0.5s) and stops when the countdown ends.

ANCEL JC200 Automatic Test Mode

Engine Condition Simulation for Accurate Diagnostics
Automatically simulates engine RPM changes from 500 to 6000 RPM, to replicate real driving conditions.

Adjustable Timing for Different Test Needs
30s to 600s adjustable timer, supports quick checks or in-depth tests.

ANCEL JC200 Precision Manual Mode

Idle Test: 600–1000 RPM
Steady Test: 1500–3000 RPM
Acceleration Test: 2500–5000 RPM
High Speed Test: > 5000 RPM

Precision Adjustable Rpm Range
Set The Rpm From 100 To 9900, Run Targeted Tests At Specific Speeds, And Locate Both Visible And Intermittent Faults.

Clogging Visually Confirmed
Dual-channel injector testing for real-time comparison of spray quality, flow rate, and clogging severity.

Clear Injection Volume Readout
Compare Injection Volumes Precisely To Improve Engine Smoothness And Combustion Efficiency.

Distinctive Shape Design

Compact, Lightweight, Portable, Net only weighs 6.61 lbs.

Applicable Voltage---Works with 110V/220V with a proper adapter
The ANCEL JC200 requires 12V DC power. When using with household AC outlets, you need a 12V DC adapter (≥1.5A) with a 5.5×2.5mm plug.

Wide Compatibility
This product inspect the fuel injectors of various motorcycles & cars.

ANCEL JC200
Dual-Cylinder Injector Tester

Main Unit
Power Cord
Signal Cord*2
Base Plate
Lock Thread*2
Lock Nut*2
Fuel Distribution Rail
Glass Measuring Cylinder*2
Φ9-11.3 Adapter w/z O-ring*2
Φ11-12.8 Adapter w/z O-ring*2
Φ13-14.5 Adapter w/z O-ring*2
Φ10 Washer*2
Φ14 Washer*2
Block class=\'pacp\'>

On Jul 6, 2026 at 20:38:06 PDT, seller added the following information: