AMD Vega 56 Fan Shroud and GPU Mount
This 3D-printed PETG kit is designed for the AMD Radeon RX Vega 56 GPU in this listing:AMD Radeon RX Vega 56 8GB HBM2 GPU/graphics card [NO FAN/SHROUD/SLOT COVER] | . It includes a two-part fan shroud and a GPU mounting bracket. No fan included.
Designed for the Delta BFB1012SHA01 DC12V 2.4A 4-pin cooler fan. (You can find this for ~$10).
Also included: 6 × M2×8 screws and 2 × M3×16 screws with nuts.
For installation, tape inside the shroud beneath the fan to hold the wire in place. You can also add tape where the shroud meets the aluminum heatsink to improve the seal. The screws may be difficult to line up; take care not to overtighten screws that thread into plastic.
The card can actually outperform other Vega 56\'s in temp control; idling around 29c and reaching up to 80c in a benchmark with the fan shroud and specified fan (details about benchmark in photos).
Please reach out about any questions about the kit or the installation of it. (Minor changes in how the heatsink of the card was cut off could change how the fan shroud fits). We accept returns.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.