- 【Wide Compatibility and Application】AC oil and dye injector kit is suitable for all types of air conditioning refrigernt charging, including R134A, R22, R12, R410A, R1234yf and other refrigernts. In addition, the AC oil injector is compatible with all oil types (POE or mineral oil) and is also compatible with fluorescent dyes for leak detection. Compressor oil injector kit can be widely used in all home/office air conditioning and automotive air conditioning systems.
- 【2Oz Large Capacity & Good Sealing Performance】The capacity of the AC oil injector tool is 2oz (60ml), and the body of the AC dye kit is made of high-quality aluminum alloy. Engine oil dye injector can quickly inject oil or refrigernt into the system, the filling speed is fast, the sealing is good and it is not easy to leak during use, and the filling is very thorough with little residue, helping you to easily complete the filling work.
- 【R134a Quick Connector of AC Oil Injector Tool R134a】AC recharge kit is equipped with R134a low pressure AC quick connector adapter, which is made of solid brass metal, which has strong sealing, wear resistance and corrosion resistance, and is not easy to rust, ensuring that you can use it for a long time.
- 【High Pressure Resistant Hose with 1/4\" SAE Thread】The hose of AC dye injector has a pressure of up to 600-3000PSI. The hose port is 1/4\" SAE thread, which can be used to connected to automotive high/low pressure quick connector/adjustable connector with 1/4\"SAE thread, or can be directly connected to air conditioner with 1/4\"SAE thread. The hose port features a non-slip knurled grip design for quick and easy connection or disconnection.
- 【Easy to Use】Fill the oil cylinder of the automotive ac oil injector with 2 ounces of refrigertion oil, connect the low pressure quick connector to the low pressure interface of the car air conditioner, and fill the appropriate pressure, and the refrigertion oil can be easily injected into the air conditioning system. The operation is very convenient, the ac oil injector tool perfectly suitable for the people who work in A/C. Note: Before adding any additive to the injector, the shut off valve must be off.
AC Oil Injector R134A R410A R22 R12 Refrigernt Compressor Oil Dye 2Oz PneumaticProduct Description
Independent Operation Steps of AC Oil Injector:
1. Start the car engine, turn on the AC switch of the air conditioner, adjust the temperature to the lowest, and turn on the blower to the maximum.
2. Unscrew the cap on top of the injector, pour the liquid (refrigerator oil/fluorescent dye/leak detection dye) into the cylinder, then tighten the cap. (Note: Before adding any liquid to the injector, the shut-off valve of the injector must be closed.)
3. Connect the R134A coupler to the injector. Connect the other end of the R134A low pressure quick connector to the low pressure filler port of the car air conditioner.
4. Turn off the AC switch and turn on the ball valve of the injector. If the cylinder of the injector is not filled with oil, it is necessary to discharge the air by pressing the exhaust valve on the injector for 5-10 seconds, and then wait for the refrigerant to return for 30 seconds.
5. Turn on the AC switch, step on the accelerator at idle speed (or pull the accelerator cable), and increase the speed to 2000 RPM for at least 10 seconds to make the filling more complete. (Note: The injector should be kept vertical, not lying flat (lying flat can lead to incomplete filling and residue).
6. After the injector tool is used, clean it with detergent.
Operation Steps for AC Oil Injector Use with Single/Double-meter Manifold Gauge with Three-color Tube:
(AC oil injector, Single/Double-meter manifold gauge, quick connector, refrigernt)
- Close the ball valve of the injector, open the lid on the top of the injector and pour in the refrigernt oil to the filling cylinder.
- Connect the blue pipe joint of the double-meter valve three-color tube to the top thread of the filling cylinder and tighten it to ensure sealing.
- Connect the yellow tube connector with the bottle opener to a bottle of refrigernt (Note: Do not pierce the bottle opener thimble through the refrigernt). The red tube of the three-color tube is not used during this operation, so it is necessary to close the red valve of the double meter valve and open the blue valve
- Connect the quick connector to the pipe joint of the injector.
- Start the car engine and turn on the AC switch of the air conditioner, and turn on the blower to the maximum
- Connect the low pressure quick connector to the low pressure port of the car air conditioner
- Open the ball valve of the injector (the refrigernt oil bottle need to be kept vertical), exhaust at the junction between the bottle opener and the yellow pipe (Remember to loosen the interface slowly, slowly exhaust the air in the pipe, and tighten the bottle opener and the yellow tube when the exhaust is completed).
- Open the refrigernt bottle to fill the refrigernt, and remove the pipe after the filling is completed.
TopAbout this itemSimilarProduct informationQuestionsReviews
Return Policy:
We offer a 30 day return policy from the receiving date.Please contact us for a Return Label.
Please use our return label provided by us because it willgo back to our supplier.
response:
Your satisfaction is very important to us! If you have anyproblem with your order, please contact us and we will do our very best to makeyou satisfied.
As long as you are happy with your purchase, please leave apositive response for us.
We will always leave you a positive response in return.
If you have any problem with your purchase, please do notleave a negative response. Please Contact us ... and your issue will be solvedquickly and positively
We are a small family-owned business trying to make it, nota huge company that doesn\'t care ... We will ALWAYS do our best for you
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.